Products

Feeder Ring x2 (UMS5/S3/Connect)

$5.00

This metal ring sits at the bottom of your Ultimaker S series feeder, preventing wear and tear to the feeder housing.   Compatible with the following models: Ultimaker S5 Ultimaker S3 Ultimaker 2+ Connect

Feeder Ring x5 (UM3/UM2+)

$7.50

This metal ring sits at the bottom of your Ultimaker 2 series or Ultimaker 3 series feeder, preventing wear and tear to the feeder housing.   Compatible with the following models: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended...

Ferrite Core (UM2/UM3)

Sold Out $3.00

FiberForce Antibacterial PLA

$65.00

FiberForce Antibacterial PLA is PLA with a little extra. This filament has been tested according to ISO 22196. Results are available in the data sheet. Available only in 2.85mm, 750g, surgical green.

FiberForce Ghostforce

$93.00

Ghostforce is a revolutionary hydrosoluble support material.  It’s not moisture-sensitive, allowing very long prints without any issue, unlike many other PVA materials which absorb water after a short time printing. It’s compatible with the most common technical polymers, including our nylon based...

FiberForce Nylforce Carbon

$69.00

Filament composed by a tough nylon reinforced with a high content of carbon fibers, it’s perfect for precise and stable prints of objects that need to resist to high-temperatures, strains and impacts. Despite being engineering grade and abrasive material, it...

FiberForce Nylforce Glass- Black Glass

$69.00

Filament composed by nylon charged with glass fibers, Nylforce Glass allows precise prints and is a great choice for technical and mechanical purposes. It has a noticeable tensile strength and stiffness, over a very high impact strength. Despite being engineering grade...

FiberForce Nylforce Glass- Natural Glass

$69.00

Filament composed by nylon charged with glass fibers, allows precise prints and it’s a great choice for technical and mechanical purposes. It has a noticeable tensile strength and stiffness, over a very high impact strength.Despite being engineering grade and abrasive...

Filament Guide Assembly (UM3/UM3X/S5/S3)

$12.00

This is the filament guide assembly that sits on the back of the reel holder to prevent filament from tangling. This is compatible with the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S5 Ultimaker S3

Front Panel UM2+

$69.60

A replacement DiBond front panel for the Ultimaker 2+. This panel is also compatible with the Ultimaker 2. Official Ultimaker Spare Part.

Fully Assembled Electronics (UMO)

Sold Out $234.00

Official Ultimaker Spare Parts for the Ultimaker Original (includes the Arduino Mega and four stepper driver cards). Not compatible with Ultimaker 2 series, or Ultimaker Original+.

Gift Card

$10.00

Shopping for someone else but not sure what to give them? Give them the gift of choice with a fbrc8 Gift Card. Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have...

Glass Clips x2 (UM3/2/Go/Ext/+/UMO+)

$4.80

A pair of the spring clips for holding the glass in place. These clips can be used on all 4 corners of the bed, or on the back two corners as preferred. These are official Ultimaker spare parts, compatible with the following...

Glass Print Bed (UM2/UM3/UMO+/S3/Connect)

$45.50

Glass print bed approximately 9" x 10". Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Ultimaker 2 Extended Ultimaker Original+ Ultimaker Original with Official...

Glue Stick (UM3/UMS5/UM2/+/UMO+)

$5.30

Uhu brand glue stick. Official Ultimaker spare part. Compatible with the following printers: Ultimaker 2+ Connect Ultimaker S5 Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker Original+ Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended...

Heated Bed Cable (UM2+/Ext+/UMO+)

$18.00

This is the cable that runs between the main electronics and the heated bed panel on the Ultimaker 2+, Ultimaker 2 Extended+, and Ultimaker Original+. This is an updated version of the cable, released in 2016. If your heated bed...

Heated Bed Cable (UM3/UM3X)

$19.50

This part is the white cable that runs from the heated bed to the main electronics board on the Ultimaker 3 series printers and is responsible for heating the bed. Official Ultimaker spare part, compatible with the following machines: Ultimaker...

Heated Bed Panel and Cable(UM2(+)/UM2X(+)UMO+)

$179.50

Replacement heated bed panel and cord for the Ultimaker 2, Ultimaker 2 Ext, Ultimaker 2+, Ultimaker2Ext+ and Ultimaker Original Plus (and the Ultimaker Original with Official Heated Bed Upgrade Kit).  

Heated Bed Panel and Cable(UM3/UM3X)

Sold Out $199.00

Replacement heated bed panel and cable for the Ultimaker 3 and Ultimaker 3 Extended. 

Heater Block (UMO/+)

$18.00

Official Ultimaker spare part for the Original and Original+. Not compatible with Ultimaker 2. Aluminum heater block accepts M6 threaded nozzle and isolator tube, as well as heater cartridge and temperature sensor.  

Heater Cartridge (UM2+/Ext+ - 24V 35W)

$50.40

Official Ultimaker Spare Parts for Ultimaker 2+ and Extended+ printers. This heater cartridge is 24V, 35W.   Note: This is not compatible with the (non-Plus) Ultimaker 2, Ultimaker 2 Extended, Ultimaker Original/+, Ultimaker 2Go or Ultimaker 2+ Connect printers.

Heater Cartridge (UM2/Ext/Go - 24V 25W)

$42.00

Official Ultimaker Spare Parts for Ultimaker² and Extended variant. This 24V, 25W cartridge fits into the integrated nozzle/block on the print head.  This part is compatible with the following printers: Ultimaker 2 Ultimaker 2 Extended Ultimaker 2 Go Please note...

Heater Cartridge 40W 18V (UMO)

$39.00

Official Ultimaker replacement printhead heater cartridge for the Ultimaker Original. 40W 18V heater cartridge. Not compatible with the Ultimaker Original+.

Heater Cartridge 40W 24V (UMO+)

$42.00

Official Ultimaker replacement 40W 24V printhead heater cartridge for the Ultimaker Original+ . Not compatible with the Ultimaker Original printer (with the green electronics board).

Hot End Holder Bottom (UM2/Ext/Go/+)

$18.60

Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2 Go

Hot End Holder Top (UM2/Ext/Go/+)

$20.65

Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers: Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2 Go

Hot End Isolator Coupler (UMO/+)

Sold Out $18.00

Official Ultimaker spare part for the Original and Original+. Not compatible with Ultimaker 2. PTFE coupler connects the Bowden Tube to the PEEK isolator, allowing the filament to pass through into the hot end.  

Hot End Isolator Nut (UM2/2+/Go/Ext/Ext+)

$33.00

Official Ultimaker Spare Part: the Isolator Nut that connects the nozzle/block to the PTFE coupler and Bowden Tube. Compatible with the following Ultimaker printers: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended...

Hot End Pack (UM2+/UM2X+)

$164.60

This pack contains the .4mm brass Olsson nozzle, TFM coupler, Isolator Nut, Isolator Spacer, Glassfiber Temperature Sensor, and Olsson  block with washer and pozidrive screw. All parts are official Ultimaker spare parts, except for the Olsson block and nozzle.  When replacing these...

Hot End Pack (UM2/Go/Ext)

$90.00

These are official Ultimaker Spare Parts, and include the integrated nozzle-block, PTFE coupler, PTFE Ring, Isolator Nut, Spring, PT100B Temperature Sensor, and 14mm set screw. For Ultimaker 2, Ultimaker 2 Go, and Ultimaker 2 Extended; not compatible with Ultimaker Original/+,...

Hot-End Cooling Fan (UM2/Go/Ext/UM2+/Connect)

$14.50

Official Ultimaker Spare Parts for Ultimaker² series printers; the 5VDC 0.08A rear fan on Ultimaker 2 Series printers that cools the printhead. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker...

Hot-End Pack (UMO/UMO+)

$68.15

Hot end parts pack comprising the heater block, nozzle and brass tube, plus teflon isolator, PEEK insulator. Also includes the Bowden tube retaining collet and blue clip. Official Ultimaker spares for the Ultimaker Original and Original+.

Injection Molded Parts Set (UMO/+)

$24.80

Official Ultimaker spare parts for the Ultimaker Original and Original+. This kit includes all of the injection molded parts in this photo, including those for the feeder assembly.

Kimya - PLA-HI 1.75mm 750g Red

$35.10

Kimya’s biosourced, odorless PLA-HI is just as easy to print as regular PLA but has extra impact resistance. The perfect choice for PLA lovers who need a little extra strength. This roll contains 750g red filament. 2.85mm and 1.75mm diameter options available. Larger...

Kimya ABS-ESD Black by Armor Group

$54.00

Kimya’s easy-to-print ABS ESD is impact resistant and protects from ESD. The perfect choice when you need a little protection. This material is available in black on a 500g spool.  The ABS ESD ideal for applications that require protection against electrostatic discharges....

Kimya ABS-ESD Off-White by Armor Group

$54.00

Kimya’s easy-to-print ABS ESD is impact resistant and protects from ESD. The perfect choice when you need a little protection. This material is available in off-white on a 500g spool.  The ABS ESD ideal for applications that require protection against electrostatic discharges....

Kimya PETG Carbon Black

$61.20

Kimya’s PETG Carbon doesn’t shrink and offers humidity resistance. The perfect choice for the PETG lover looking for a little extra. This roll contains 500g of black filament. This material has supported profiles on the Ultimaker Marketplace for the following machines: Ultimaker S3...

Kimya PETG-S Black by Armor Group

$39.60

Kimya’s hydrophobic PETG-S  (PETG Standard) offers high flexibility and impact strength while printing easily and odorlessly. The perfect choice for the PETG lover.  This roll contains 750g of 2.85mm black filament.

Kimya PETG-S Translucent by Armor Group

$39.60

Kimya’s hydrophobic PETG-S (PETG Standard) offers high flexibility and impact strength while printing easily and odorlessly. The perfect choice for the PETG lover.  This roll contains 750g of 2.85mm translucent filament.

Kimya PETG-S White by Armor Group

$39.60

Kimya’s hydrophobic PETG-S (PETG Standard) offers high flexibility and impact strength while printing easily and odorlessly. The perfect choice for the PETG lover.  This roll contains 750g of 2.85mm white filament.