Bambu Lab Support for ABS is a 1.75mm support filament made specifically for ABS. It adheres precisely to the ABS surface, so support comes off easily and leaves a clean interface. It works with the AMS 2 Pro, AMS HT, and AMS, and it needs an enclosed printer.

Highlights

• Easy support removal. Formulated for ABS, so supports come off easily and post-processing is quicker.
• Superior interface quality. Prints with a 0 top Z distance and 0 top interface spacing for a scar-free support surface and sharper details.
• Works with the AMS. Compatible with the AMS 2 Pro, AMS HT, and AMS.
• Ready to load. Comes on a high temperature reusable spool, with print settings stored in RFID.

Specifications

Printing and Care

• Use it for support only. This filament is meant only for the support interface of ABS prints.
• Enclose and ventilate. Pungent, unpleasant odors may be released during printing, so use an enclosed printer in a well-ventilated area.
• Protect layer strength. When layer strength matters, raise the flushing volume above 800mm³. Incomplete flushing can reduce layer adhesion on surfaces that sit on the same horizontal plane as the support surface.
• Peel it easier. A higher initial layer speed gives a more peelable support, but it increases the risk of warping.
• Use limonene with care. Support for ABS dissolves in limonene, so follow the usage norms and safety guidance.
• Dry if needed. Drying before use is optional, and a dry place is best for storage.

Documents