Products
eufyMake Rotary Adaptor for E1
$399.99
Enable printing directly on cylinders, cones & mugs! This module snaps into the bed connector port inside the E1, and allows you to print directly onto cylindrical and conical objects such as tumblers, mugs, and glasses. Free FedEx Ground shipping...
View full product details
EXModel Software
$540.00
EXModel is a powerful gateway that simplifies CAD modeling, from 3D scanning to manufacturing. It provides a comprehensive set of tools that enable you to transform a mesh into a professional-quality CAD solid model in just a few simple steps....
View full product details
Faberdashery Crystal Clear
$5.00 $40.00
A high quality natural colored transparent PLA. Sold as a loose coil, 100m long.
View full product details
Faberdashery Jade Green PLA
Sold Out
A high quality PLA in a lovely translucent green. Sold as a loose coil, 100m long. 2.85mm diameter filament is compatible with Ultimaker, Lulzbot, and BCN3D printers.
View full product details
Faberdashery Lemon Drop PLA
$5.00 $40.00
A high quality PLA with a translucent, lemony yellow color. Sold as a loose coil, 100m long. 2.85mm diameter filament is compatible with Ultimaker, Lulzbot, and BCN3D printers.
View full product details
Faberdashery Mellow Yellow PLA
$5.00 $40.00
A high quality PLA with a bright yellow pop. Sold as a loose coil, 100m long.
View full product details
Faberdashery Orange Fizz PLA
$5.00 $40.00
A high quality PLA with a tangy, translucent orange color. Sold as a loose coil, 100m long. 2.85mm diameter filament is compatible with Ultimaker, Lulzbot, and BCN3D printers.
View full product details
Faberdashery Sugar Plum
Sold Out
A high quality PLA in pastel purple. Sold as a loose coil, 100m long.
View full product details
FAC019 - Spool Holder (A1 Mini)
$2.99
The Spool holder used in A1 mini is attached to the Z-axis column and is compatible with most commonly used filament spools. This part is only compatible with the A1 Mini. Not compatible with any other printers.
View full product details
FAC021-N Purge Wiper (A1/A1 Mini)
$4.99
This Purge Wiper is designed to efficiently remove waste filament generated by the printer's hotend. It gathers and dislodges waste filament during different stages, including printer setup, pause and resume operations, and filament changes for multi-color printing. Its purpose is...
View full product details
FAC034 - Replacement Filament Cutter x3 (A1/A1 Mini/P1S/P1P/X1C/X1E/H2S)
$2.99
The filament can be cut to prevent the supplies from clogging. When used with AMS, it assists with multi-material switching.
View full product details
FAC055 - Filament Sensor Base (A1/A1 Mini)
Sold Out
The Filament Sensor Base is installed on the top of the extruder unit of the tool head and is used as a fixed base for mounting the filament sensor (Hall Board) on its side. It also serves as the base...
View full product details
FAC095 - Replacement Filament Cutter x3 (H2D)
$3.99
The filament can be cut to prevent the supplies from clogging. When used with AMS, it assists with multi-material switching.
View full product details
FAC100 - Purge Wiper (H2D)
$19.99
The Purge Wiper, positioned above the left inner liner, is used to clean the nozzle and for removing waste filament during printing.
View full product details
FAC125 - Flow Blocker x3 (H2D/H2C)
$9.99
The flow blocker the metallic part installed on the toolhead that seals the inactive nozzle to prevent oozing during printing. Replacement instructions are available here. What's in the box: 3x flow blockers H2D/H2C compatible 3x MG2.5-8 screws
View full product details
FAC142 - Extruder Filament Sensor (H2S)
$9.99
The Extruder Filament Sensor is located in the extruder and detects both the presence of filament and the position of the filament cutter lever.
View full product details
FAC143 - Filament Cutter Lever (H2S)
$4.99
The Filament Cutter Lever holds the cutter blade and actuates it to slice the filament. What's included: Filament Cutter Lever x1 Torsion Spring x1 BT2.6 Screw x1 Washer x1 Retaining Clip x1
View full product details
FAC147 - Purge Wiper (H2S)
$9.99
The Purge Wiper, positioned above the left inner liner, is used to clean the nozzle and for removing waste filament during printing.
View full product details
FAC185 - Eddy Sensor (H2S)
Sold Out
The Eddy Sensor detects whether the nozzle is covered with melted filament. What's in the box? Eddy Sensor x1 BT2-6.5 Screw x2
View full product details
FAC207 - Flow Blocker x3 (X2D)
$4.99
The flow blocker the metallic part installed on the toolhead that seals the inactive nozzle to prevent oozing during printing. Replacement instructions are available here.
View full product details
FAC234 - TPU Assist Module
$49.99
Printing TPU has traditionally been a challenge due to the filament's inherent elasticity and high friction. To ensure a smooth extrusion, the feed path must be as short and direct as possible. The TPU Feed Assist Module eliminates the struggle by providing...
View full product details
FAE002 - Extruder Connection Board (P1S/P1P)
Sold Out
The Extruder Connection Board for P1S and P1P models is designed to provide seamless integration between the extruder and control systems in 3D printers. The Extruder Interface Board is an auxiliary board of the TH board, and it is used...
View full product details
FAE003 - TH Board (P1P/P1S)
$39.99
The toolhead (TH) board is the main board of the toolhead to ensure the smooth functioning of the toolhead parts, including but not limited to the HotEnd, extruder, cooling fan, and filament cutter. This part is compatible with the P1P...
View full product details
FAE004 - Extruder TH Board V9 (X1/X1C)
$10.99
Extruder Interface Board V9 is the part of the tool head board where the print head wires are connected. It's also connected to the main TH board V9 and it's only compatible with V9 version of the TH board. This...
View full product details
FAE005 - Print Head Rear Cover (X1/X1C/P1P/P1S/X1E)
$4.99
The Print Head Rear Cover for the X1, X1C, P1P, P1S, and X1E printers protects the back side of your print head while ensuring proper airflow.
View full product details
FAE006 - Toolhead Middle Housing (X1/X1C/P1P/P1S/X1E)
$9.99
The Print Head Middle Cover for X1, X1C, P1P, P1S, and X1E printers covers the middle of the printer's toolhead and magnetically attached the pieces.
View full product details
FAE007 - Print Head Rear Cover (A1 Mini/A1)
$2.99
The ToolHead/PrintHead Rear Cover for A1 Mini and A1 printers is designed to protect the rear part of the print head. This part includes the Toolhead rear housing, the left wire cover, and the right wire cover.
View full product details
FAE008-N - Extruder Gear Assembly (A1 Mini/A1)
$9.99
The Hardened Extruder Gear Assembly for A1 and A1 Mini is an internal component of the Extruder Unit. It comprises a driven gear and an active gear that work together to feed filament into the HotEnd. Built with heavy-duty materials, the extruder...
View full product details
FAE009 - TH Board (A1 Mini)
$24.99
The toolhead (TH) board is the main board of the toolhead to ensure the smooth functioning of the toolhead parts, including the HotEnd heating assembly, extruder unit, HotEnd cooling fan, and filament sensor. This part is compatible with the A1...
View full product details
FAE010 - Filament sensor (A1 Mini/A1)
$4.99
The Filament Sensor for A1 mini and A1 printers provides accurate detection of filament presence and run-out during 3D printing. When printing with multiple filaments, the filament sensor can recognize the input and output of filaments and transmit the information...
View full product details
FAE012 - Print Head Front Cover (A1 Mini/A1)
Sold Out
The Print Head Front Cover for the A1 Mini and A1 printers is designed to protect the front part of the print head. It features a circular window that allows you to observe rotating extruder gear while your printer is printing.
View full product details
FAE014-N - Extruder Unit for A1 Series (A1 Mini/A1)
$31.99
The Extruder Unit for A1 series, designed for A1 mini printers, delivers precise filament control and consistent extrusion for high-quality 3D printing. The Extruder Unit features dual gears made of hardened steel to feed filament into the hotend. The hardened steel gears...
View full product details
FAE015 - Hardened Steel Extruder Gear Assembly (X1C/P1S/P1P)
$19.99
The Hardened Steel Extruder Gear Assembly for X1C, P1S, and P1P models is engineered to provide precise, consistent gear engagement for smooth filament extrusion. Its durable, high-quality steel construction minimizes slippage and wear, ensuring reliable performance and improved print accuracy. ...
View full product details
FAE016 - P1 Series Extruder Unit (P1P/P1S)
$34.99
The P1 Series Extruder Unit for P1P and P1S printers delivers precise filament control and consistent extrusion performance for high-quality 3D printing. The stainless steel extruder unit features double gears made of stainless steel, which increases extrusion force and prevents slippage. It...
View full product details
FAE017 - X1 Series Extruder Unit (X1C)
$44.99
The hardened steel extruder for the X1C is equipped with double gears made of hardened steel, which provides increased extrusion force, prevents slippage, and enhances abrasion resistance. These gears enable the extruder unit to handle tough engineering filaments such as...
View full product details
FAE018 - Extruder Unit (X1E)
$45.00
The hardened steel extruder for the X1E is equipped with double gears made of hardened steel, which provides increased extrusion force, prevents slippage, and enhances abrasion resistance. These gears enable the extruder unit to handle tough engineering filaments such as...
View full product details
FAE020 - TH Board (A1)
Sold Out
The toolhead (TH) board is the main board of the toolhead to ensure the smooth functioning of the toolhead parts, including but not limited to the hotend, extruder, cooling fan, filament cutter, etc.
View full product details
FAE030 - Toolhead Rear Cover (H2S)
$4.99
The Toolhead Rear Cover shields the rear components of the toolhead from dust and debris. What's included: Toolhead rear cover x1 BT2-5 Screw x3
View full product details
FAE031 - Extruder Unit (H2S)
Sold Out
The Extruder Unit drives filament into the HotEnd, boosting extrusion force, minimizing slippage, and enhancing wear resistance. Paired with a robust extruder motor, it ensures reliable extrusion power. What's included: Extruder Unit x1 M2.5-8 Screw x2 BT3-12 Screw x2...
View full product details
FAE032 - Extruder Unit Front Cover (H2S)
$9.99
The Extruder Unit Front Cover protects internal components from dust and debris, aids in filament alignment, and adds to the structural integrity of the extrusion system. What's included: Extruder Unit Front Cover x1 Filament Pressure Block x1 Rotary Wheel...
View full product details
FAE033 - Extruder Gear Assembly (H2S)
Sold Out
The Extruder Gear Assembly precisely advances and controls filament movement, ensuring smooth printing and enabling filament changes when required. What's included: Extruder Drive Gear x1 Extruder Idler Gear x1 Shim Washer x1 Compression Washer x1 Compression Spring x1 M3-11...
View full product details
FAH001 - Complete HotEnd Assembly with Hardened Steel .4mm Nozzle (X1C)
$34.99
The Complete HotEnd Assembly with Hardened Steel .4mm Nozzle for X1C includes the HotEnd with nozzle, heater, thermistor, and cooling fan to create the complete HotEnd for quick and easy changing out of the HotEnd parts on your X1C printer. The...
View full product details
FAH001-C-3 - Ceramic Heater for HotEnd - 3 pieces (X1C)
$13.99
The Ceramic Heater for HotEnd designed for X1C provides rapid, even heat distribution to ensure optimal thermal performance during 3D printing. This package contains 3 ceramic heaters, 3 containers of thermal grease, and 3 retaining clips. Compatible only with the...
View full product details
FAH001-P - Complete HotEnd Assembly with Hardened Steel .4mm Nozzle (P1P/P1S)
Sold Out
The Complete HotEnd Assembly with Hardened Steel .4mm Nozzle for P1S/P1P includes the HotEnd with nozzle, heater, thermistor, and cooling fan to create the complete HotEnd for quick and easy changing out of the HotEnd parts on your P1S/P1P printer....
View full product details
FAH001-S-3 - Silicone Sock for HotEnd (P1P/P1S/X1C/X1E)
$6.99
The Silicone Sock for HotEnd is engineered to provide optimal thermal insulation and protection for your 3D printer's HotEnd. Designed with high-quality silicone, it ensures consistent heat retention while preventing heat loss and potential damage during extended printing sessions. This...
View full product details
FAH001-T-3 - Thermistor for HotEnd x3 (X1C)
$13.99
The Thermistor for HotEnd designed for X1C ensures accurate temperature monitoring and control in 3D printing applications. It is for use with Bambu Lab complete HotEnd assembly for the X1C only. This package includes three thermistors, three sets of thermal...
View full product details
FAH003 - Complete HotEnd Assembly with Hardened Steel .8mm Nozzle (X1C)
$34.99
The Complete Hotend Assembly with Hardened Steel .8mm Nozzle for X1C includes the HotEnd with nozzle, heater, thermistor, and cooling fan to create the complete HotEnd for quick and easy changing out of the HotEnd parts on your X1C printer....
View full product details
FAH003-N-1 - HotEnd with Hardened Steel .8mm Nozzle (P1P/P1S/X1C)
$14.99
The HotEnd with Hardened Steel .8mm Nozzle is compatible with the P1P, P1S, and X1C. This size nozzle gives you the fastest printing for the toughest materials. Engineered for reliability, this HotEnd reduces clogs and maintains fine detail in complex...
View full product details
FAH003-P - Complete HotEnd Assembly with Hardened Steel .8mm Nozzle (P1P/P1S)
$34.99
The Complete HotEnd Assembly with Hardened Steel .8mm Nozzle for P1S/P1P includes the HotEnd with nozzle, heater, thermistor, and cooling fan to create the complete HotEnd for quick and easy changing out of the HotEnd parts on your P1S/P1P printer....
View full product details
FAH004 - Complete HotEnd Assembly with Stainless Steel .2mm Nozzle (X1C)
$34.99
The Complete HotEnd Assembly with Stainless Steel .2mm Nozzle for X1C includes the HotEnd with nozzle, heater, thermistor, and cooling fan to create the complete HotEnd for quick and easy changing out of the HotEnd parts on your X1C printer....
View full product details