Tools & Supplies
2mm Hex Head Screwdriver (UM2/UM3/S5/S3/UMO/+)
$15.90
2mm hex head screwdriver. Official Ultimaker spare part. Compatible with the following printers: Ultimaker S7 Ultimaker 2+ Connect Ultimaker S5 Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker Original+ Ultimaker 2 Go Ultimaker 2 Ultimaker...
View full product details
4" Blue Tape Squares
$31.50
The perfect size for the prints on the small unheated bed of the Ultimaker 2 Go, each roll has 25 precut-squares of premium Scotch brand blue tape, making it quick, easy and neat to re-cover the print bed. For best...
View full product details
AESUB Blue
$39.50
Disappearing state-of-the-art scanningspray No cleaning required Thin and homogeneous coating Free of pigments Developed and approved by scanning experts AESUB blue is a self-vanishing scanning spray developed by scanning experts. The spray evaporates within a few hours, meaning that there...
View full product details
AESUB Orange
$42.00
Disappearing state-of-the-art scanning spray Long-lasting No cleaning required Thin and homogeneous coating Free of pigments Developed and approved by scanning experts AESUB orange is a long-lasting self-volatilizing scanning spray developed by scanning experts. It eliminates basic application problems of 3D...
View full product details
AESUB Transparent
$47.50
Transparent vanishing dulling spray Eliminates reflections without loss of colour information Perfect for 3d scanning, photogrammetry, film and photography Thin and homogeneous coating Free of pigments No cleaning required AESUB transparent is a scan spray that temporarily mattes glossy surfaces...
View full product details
AESUB White
$17.50
Permanent state-of-the-art scanning spray Free of titanium dioxide nano particles (TiO2) Thin and homogenous coating Developed and approved by scanning experts AESUB white is a permanent scanning spray developed by scanning experts. It is the result of consistent further development...
View full product details
Boxed Filter Assembly (S5/S7/UM2C)
$56.00
Filter assembly from Ultimaker for the Ultimaker S7, Ultimaker S5, and Ultimaker 2+ Connect Air Managers. Filters should be replaced after approximately 1500 hours of runtime.
View full product details
Desiccant Cartridge (x2)
$140.00
Sold as a pack of 2 cartridges, this is a drop in replacement or spare desiccant cartridge for quick and easy swap out on Drywise machine. The desiccant beads can be dehydrated again as needed in the oven at 200-240C...
View full product details
Drywise
$1,899.00
Introducing Drywise - the game-changing quality assurance tool for 3D printing. Drywise patented closed loop drying system delivers perfectly conditioned 3D printing filament, even for highly hygroscopic materials like nylons, almost instantly and with virtually no downtime or pre-planning needed....
View full product details
Drywise O-Ring (10 pack)
$12.00
Replacement O-rings for the Drywise filament dryers; rings come in a pack of 10 and may be orange or black. Please choose 1.75 or 2.85 size to match your Drywise and filament.
View full product details
fbrc8 S3 Maintenance Kit
$333.75
The S3 Maintenance Kit by fbrc8 offers everything you'll want to keep on hand for keeping your printer running in top shape, all year long. This kit includes: Ultimaker S3 Glass x1 Hot End Cooling Fan x2 Timing Belt 200...
View full product details
fbrc8 S5 Maintenance Kit
$355.75
The S5 Maintenance Kit by fbrc8 offers everything you'll want to keep on hand for keeping your printer running in top shape, all year long. This kit includes: Ultimaker S5 Glass x1 Hot End Cooling Fan x2 Timing Belt 200...
View full product details
fbrc8 S7 Maintenance Kit
$431.75
The S7 Maintenance Kit by fbrc8 offers everything you'll want to keep on hand for keeping your printer running in top shape, all year long. This kit includes: Ultimaker PEI Flex Plate x1 Timing Belt 200 (2) x1 Sliding Block Set...
View full product details
Machine Oil (UM2/UM3/UMO/+/Ext/Go/S5/S3/S7)
Sold Out
Light machine oil like sewing machine oil should be applied regularly to all of the smooth axis rods on your printer to keep everything in smooth operation. Compatible on the following printer models: Ultimaker S7 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker...
View full product details
Magigoo Flex (50ml)
$24.99
WHAT: MAGIGOO Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also...
View full product details
Magigoo HT (50ml)
$47.00
WHAT: MAGIGOO HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off. WHY: High temperature materials such...
View full product details
Magigoo Metal (50ml)
$47.00
WHAT: MAGIGOO Metal is designed as a professional first layer adhesive with BASF Ultrafuse® 316L. Magigoo Metal is non-hazardous, non-flammable and also approved for use in post processing stages of BASF Ultrafuse® 316L. Magigoo Metal also enables easy part removal...
View full product details
Magigoo Original (120ml) (ABS, PLA, PETG, HIPS, ASA, TPU)
$47.00
All you need for sure adhesion of 3D prints Magigoo is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem'. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when...
View full product details
Magigoo Original (50ml) (ABS, PLA, PETG, HIPS, ASA, TPU)
$19.95
All you need for sure adhesion of 3D prints Magigoo is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem'. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when...
View full product details
Magigoo PA (50ml)
$24.99
WHAT: MAGIGOO PA is designed for professional use, to work exclusively with Polyamide filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off. WHY: PA (polyamide) describes a...
View full product details
Magigoo PC (50ml)
$24.99
WHAT: MAGIGOO PC is designed to work exclusively with polycarbonate type filaments. This adhesive for professional use makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique...
View full product details
Magigoo PP (50ml)
$24.99
WHAT: MAGIGOO PP is designed for professional use, to work exclusively with polypropylene filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off if the included procedure is...
View full product details
Magigoo PPGF (50ml)
$36.99
WHAT: Magigoo PP-GF is designed to work exclusively with glass re-insforced polypropylene(GFPP) filaments.This adhesive makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. WHY: Polypropylene (PP) is a...
View full product details
Magigoo Pro Kit (Original/PA/PC/PP)
$85.00
WHAT: Magigoo PRO adhesives are designed for professional use to work exclusively with engineering filaments. These adhesives for professional use make sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it...
View full product details
Magnalube Grease (UM2/UM3/UMO/+/Ext/Go/S5)
$12.10
Thick green machine grease used for lubricating the trapezoidal lead screw on your printer and ensuring smooth movements on the Z-axis. Compatible on the following printer models: UltiMaker S7 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker...
View full product details
PEI Flex Plate (S7/Factor4)
Sold Out
This is the official PEI flex plate for the UltiMaker S7 and Factor 4; it is not compatible with other models of UltiMaker machines.
View full product details
Preheater
$349.00
The Drywise Pre-Heater add-on is designed and built for use in combination with Drywise Inline Filament Dryer. The add-on is essential for reliable and consistent drying of specific material types prior to drying. These materials include carbon and glass fiber...
View full product details
Spare Tips for Modifi3d Print Finishing Tool
$16.99
This set includes extra tips for the Modifi3D print finishing tool, but not the tool itself. The pack includes: Knife Tip Needle Tip Point Tip Scoop Tip By design, this exposed metal part of this tool gets extremely hot. Please use extreme...
View full product details
Ultimaker 2+ Maintenance Kit (MK)
$225.00 $435.00
Over $150 in savings if you purchase the Ultimaker 2+ Maintenance Kit instead of buying the parts separately. Save now! Our comprehensive Maintenance Kit contains everything you need to maintain your Ultimaker 2+ and Ultimaker 2 Extended+ with ease and...
View full product details
Ultimaker 3 Maintenance Kit (MK)
$225.00 $327.00
Over $100 in savings if you purchase the Ultimaker 3 Maintenance Kit instead of buying the parts separately. Save now! Our comprehensive Maintenance Kit contains everything you need to maintain your Ultimaker 3 and Ultimaker 3 Extended with ease and...
View full product details
Ultimaker Cleaning Filament - 2297
$21.00
For Maintaining Your Nozzles Using the Ultimaker cleaning filament is the most effective way to unclog and keep print cores and nozzles in optimal condition. Using UltiMaker cleaning filament is the most effective way to unclog and keep print cores...
View full product details