$21.00
Using the Ultimaker cleaning filament is the most effective way to unclog and keep print cores and nozzles in optimal condition.
Using UltiMaker cleaning filament is the most effective way to unclog and keep print cores and nozzles in optimal condition.
The Ultimaker cleaning filament is used for both print core maintenance and unclogging procedures. We recommend performing regular maintenance once every three months for the AA and BB Print Cores. Unclog the print core if there is no material extruding from the nozzle for at least ten minutes.
For the CC .6 and CC .4, preventative cleaning is recommended at least once a month, or every 100-150 print hours, due to the fibrous nature of composite materials.
This filament can be used to clean the Print Core on the S-Line and UltiMaker 3 series machines, and on the Ultimaker 2 series nozzles by applying hot and cold pulls. Hot pulls are used to get the biggest parts of carbonized material out of the print core and are highly recommended when the print core is clogged. With a cold pull, the remaining small particles will be removed, ensuring the print core is completely clean.
For detailed instructions on how to clean a print core with the cleaning filament, take a look at this video.
Collections: Cleaning Filament, General Use Filaments, Tools, Supplies, and Scanning Spray, Ultimaker 2/2+ Spare Parts, Ultimaker 3 Spare Parts, Ultimaker Engineering Materials, UltiMaker Factor 4, Ultimaker Filament, Ultimaker General-Use Filaments, Ultimaker Original Spare Parts, UltiMaker S3, UltiMaker S5, UltiMaker S7
Category: cleaning, Filament, Ultimaker
Type: Filament
Sold Out $169.00
A genuine 'BB' style Ultimaker Print Core with a 0.4mm nozzle, for printing PVA support material. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Ultimaker S7 UltiMaker Factor 4
View full product detailsSold Out $28.60
Print Head Cable compatible for the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Ultimaker S7 Official Ultimaker Spare part. Installation instructions are available for the S-Series and Ultimaker 3 series. Note for S5 Customers: If you have...
View full product details$7.50
A pair of strong Bowden tube collets and blue retaining clips compatible with all Ultimaker series of machines. These collets have thick teeth to provide additional grip on the bowden tube for the most reliable printing experience. When installed in...
View full product details