Official Ultimaker Spare Parts for the Ultimaker Original and Original+. Complete set of 4 long and 2 short MXL belts.
Not compatible with Ultimaker 2.
Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers:
Ultimaker 2+ Connect
Ultimaker 2
Ultimaker 2+
Ultimaker 2 Extended
Ultimaker 2 Extended+
Ultimaker 2 Go
Official Ultimaker Spare Parts - compatible with the Ultimaker 2+/2Ext+, Ultimaker 2 (inc Go and Extended variants), and the Ultimaker Original+. Includes the main electronics board and safety jumpers. Not compatible with the Ultimaker Original. Please note: the current version of...
X-Axis end stop switch (Blue wire).
Official Ultimaker spare part compatible with the following printers:
Ultimaker 3
Ultimaker 3 Extended
Ultimaker 2
Ultimaker 2+
Ultimaker 2 Extended
Ultimaker 2 Extended+
Note:Â NOTÂ compatible with the UMO/UMO+, S5, S3, or Ultimaker 2+ Connect.
Y-axis end stop limit switch (Red Wire). Official Ultimaker Spare Parts compatible with the following Ultimaker printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended Note:Â NOTÂ compatible with the UMO/UMO+, S5,...
Z-axis endstop limit switch, with short, black wire.
Official Ultimaker Spare Part for the following printers:
Ultimaker 2+
Ultimaker 2 Extended+
Ultimaker 3
Ultimaker 3 Extended
Ultimaker 2
Ultimaker 2 Extended
Note:Â NOTÂ compatible with the S5, S3, or Ultimaker 2+ Connect.
Replacement extruder feeder motor and knurled wheel for Ultimaker 2 printers.
An official Ultimaker spare part for:
Ultimaker 2
Ultimaker 2 Extended
Ultimaker 2 Go
Not compatible with the Ultimaker 2+ series or Ultimaker 3 series.
Â
This is the filament guide assembly that sits on the back of the reel holder to prevent filament from tangling.
This is compatible with the following printers:
Ultimaker 3
Ultimaker 3 Extended
Ultimaker S5
Ultimaker S3
Official Ultimaker Spare Parts for the Ultimaker Original (includes the Arduino Mega and four stepper driver cards).
Not compatible with Ultimaker 2 series, or Ultimaker Original+.
A pair of the spring clips for holding the glass in place. These clips can be used on all 4 corners of the bed, or on the back two corners as preferred. These are official Ultimaker spare parts, compatible with the following...
This is the cable that runs between the main electronics and the heated bed panel on the Ultimaker 2+, Ultimaker 2 Extended+, and Ultimaker Original+. This is an updated version of the cable, released in 2016. If your heated bed...
OEM heated bed panel and cable for the Ultimaker 2+ Connect. The bed and cable set is compatible with the following machines: Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker2 Extended+ Ultimaker Original+ (and the Ultimaker Original with Official Heated Bed Upgrade...
Official Ultimaker spare part for the Original and Original+. Not compatible with Ultimaker 2.
Aluminum heater block accepts M6 threaded nozzle and isolator tube, as well as heater cartridge and temperature sensor.
Â
Official Ultimaker replacement printhead heater cartridge for the Ultimaker Original. 40W 18V heater cartridge. Not compatible with the Ultimaker Original+.
Official Ultimaker replacement 40W 24V printhead heater cartridge for the Ultimaker Original+ .
Not compatible with the Ultimaker Original printer (with the green electronics board).
Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers:
Ultimaker 2+ Connect
Ultimaker 2
Ultimaker 2+
Ultimaker 2 Extended
Ultimaker 2 Extended+
Ultimaker 2 Go
Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers:
Ultimaker 2
Ultimaker 2+
Ultimaker 2 Extended
Ultimaker 2 Extended+
Ultimaker 2 Go
Official Ultimaker Spare Part: the Isolator Nut that connects the nozzle/block to the PTFE coupler and Bowden Tube. Compatible with the following Ultimaker printers: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended...
Official Ultimaker Spare Parts for Ultimaker² series printers; the 5VDC 0.08A rear fan on Ultimaker 2 Series printers that cools the printhead. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker...
Hot end parts pack comprising the heater block, nozzle and brass tube, plus teflon isolator, PEEK insulator. Also includes the Bowden tube retaining collet and blue clip.
Official Ultimaker spares for the Ultimaker Original and Original+.
Official Ultimaker spare parts for the Ultimaker Original and Original+. This kit includes all of the injection molded parts in this photo, including those for the feeder assembly.
Model Cooling Fan 12VDC (x2) (UM2/Go/Ext/UM2+/Connect)
$23.40
Official Ultimaker Spare Parts for Ultimaker² series printers; a pair of 12V DC 0.1A fans, as used for the side fans on all Ultimaker 2/Ultimaker 2+ series printers. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker...
Two plastic spacers for use on the X-motor and Y-motor on your printer. Official Ultimaker spare parts compatible for the following models of Ultimaker printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Go Ultimaker Original+...
Official Ultimaker Spare Parts for Ultimaker Original and Original+; PEEK isolator connects the PTFE coupler at the end of the Bowden Tube to the brass tube and heater block.
Official Ultimaker 24V Power Supply for the Ultimaker 2 series, Ultimaker Original+, and Ultimaker 3 series printers. Includes cable for standard US-style 3-pin wall socket. Compatible with the following machines: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2+ Extended Ultimaker 2 Ultimaker 2...
The Power Cable US Type C13 is an official Ultimaker Spare Part. This power cable is compatible with the following models of Ultimaker printers: Ultimaker S7 Ultimaker S5 Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Extended+ Ultimaker 2+...
This is the print head assembly for the Ultimaker S3 and Ultimaker S5. It includes all pictured parts here, including the printhead cable, PCB, fans, and nozzle seal. Note: If you have the original version of the S5 (featuring the...
This is the print head assembly for the Ultimaker 3 and Ultimaker 3 Extended. It includes all pictured parts here, including the printhead cable, fans, and nozzle seal. If you're looking for spare nozzle seals for this printhead, they are...
Set of 3 separate injection-moulded parts that comprise the print head block for Ultimaker 2 Series printers.Â
Official Ultimaker spare part compatible with the following printers:
Ultimaker 2+
Ultimaker 2 Extended+
Ultimaker 2 Go
Ultimaker 2
Ultimaker 2 Extended
Replacement printhead cable and braided sheath for the Ultimaker 2. Includes cables for side and rear fans, with connectors. Can also be used on the Extended and 2Go, although the cables used on those printers are different lengths normally. An...
Print Head Linear Bearing Pack (UM2/Go/Ext/Original/+)
$26.50
Official Ultimaker Spare Parts for all Ultimaker Original and Ultimaker 2 family printers: Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2+ Connect Ultimaker 2 Go Ultimaker Original Ultimaker Original+ This is a pack of two LM6LUU linear...
The DiBond panel that folds over the z-stage bearing at the back of the print bed. Compatible with Ultimaker 2, and Ultimaker 2 Extended.
Official Ultimaker Spare Parts.
Printhead Temperature Sensor (PT100B) UM2/UM2X/UM2Go/UMO+
$45.00
This is the official Ultimaker spare part for the Ultimaker Original+.
Also compatible with the Ultimaker 2, Ultimaker 2Go, and Ultimaker 2 Extended.
Not compatible with the Ultimaker 2+ or Ultimaker 2+ Extended.
Official Ultimaker Spare Parts for the Ultimaker 2 series printers. This is a complete set of 4 sliding blocks and long belts. Compatible with the following models of Ultimaker printer: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Ultimaker 2 Extended Not...
Official Ultimaker Spare Parts for the Ultimaker 3, Ultimaker 3 Extended, and Ultimaker 2+ Connect. This is a complete set of 4 sliding blocks and long S2M belts.
Not compatible with other models or series of Ultimaker printers.
Installation instructions available here.Â
Glass print bed approximately 5" x 5".
Official Ultimaker Spare Parts for Ultimaker 2Go printer.We recommend using this bed in conjunction with blue painter's tape squares due to the Ultimaker 2Go print bed being unheated.