FiberForce Antibacterial PLA is PLA with a little extra. This filament has been tested according to ISO 22196. Results are available in the data sheet. Available only in 2.85mm, 750g, surgical green.
Ghostforce is hydrosoluble BVOH compatible with FiberForce's Smart ABS, Nylforce Carbon and Nylforce Glass.
If you're looking to print ABS with dissolvable supports, this combination of Ghostforce and Smart ABS is for you.
Available only as 2.85mm, 500g
Nylforce Carbon is carbon fiber reinforced polyamide. This engineering grade filament is a tough nylon combined with a high content of carbon fiber. If you're looking to print objects resistant to high temperature, strain, and impact, you've come to the...
Nylforce Glass is nylon filament infused with glass fibers. This engineering grade filament provides high tensile strength and stiffness for technical and mechanical prints. 2.85mm, 500g, black glass color.  Compatible with water soluble Ghostforce support filament. Suggested for use on Ultimaker S3 and Ultimaker...
Nylforce Glass is nylon filament infused with glass fibers. This engineering grade filament provides high tensile strength and stiffness for technical and mechanical prints. 2.85mm, 500g, natural glass color. Compatible with water soluble Ghostforce support filament. Suggested for use on Ultimaker S3 and Ultimaker...
FiberForce Smart ABS is ABS with a Bonus. Smart ABS is compatible with Fiber Force Ghostforce hydrosoluble support material. These products team up to bring you the ABS properties you need with the support you've always wanted. This black filament is...
FiberForce Smart ABS is ABS with a Bonus. Smart ABS is compatible with Fiber Force Ghostforce hydrosoluble support material. This material is dark brown. These products team up to bring you the ABS properties you need with the support you've...
FiberForce Smart ABS is ABS with a Bonus. Smart ABS is compatible with Fiber Force Ghostforce hydrosoluble support material. This material is light brown/mustard color. These products team up to bring you the ABS properties you need with the support...
FiberForce Smart ABS is ABS with a Bonus. Smart ABS is compatible with Fiber Force Ghostforce hydrosoluble support material. These products team up to bring you the ABS properties you need with the support you've always wanted. This white filament is...
This is the filament guide assembly that sits on the back of the reel holder to prevent filament from tangling.
This is compatible with the following printers:
Ultimaker 3
Ultimaker 3 Extended
Ultimaker S5
Ultimaker S3
Proto-Pasta Aromatic Coffee High Temp Annealable PLA Filament (500g)
$25.00
Proto-pasta's Aromatic Coffee PLA is the first specialty blend based on their new High Temp PLA formulation. This seemingly odorless plastic releases an invigorating roast coffee scent when heated. Beyond this novel feature, it is the most beautiful pearlescent, translucent bronze color when printed and...
8" diameter spool of 500g of ProtoPasta's Conductive PLA. Prints with normal PLA settings, or a little hotter - heated bed not required. Volume resistivity of 3D printed parts perpendicular to layers: 30 ohm-cm Volume resistivity of 3D printed parts through...
8" diameter spool of 500g of Proto-Pasta's Ferromagnetic Iron-infused PLA. This filament contains powdered iron, so that it has a rough cast metal appearance when printed, but can be rusted to give an aged appearance. It also responds to magnets (neodymium recommended). Prints...
Designer Finish + Engineering Performance for Every Printer! A bright alternative to Carbon or Glass Fibers, Red Matte Fiber HTPLA uses plant fibers great looks in both artistic and technical parts with no special hardware required! Finish Printed parts have a...
Designer Finish + Engineering Performance for Every Printer! A bright alternative to Carbon or Glass Fibers, Red Matte Fiber HTPLA uses plant fibers great looks in both artistic and technical parts with no special hardware required! Finish Printed parts have a...
8" diameter spool of 500g of ProtoPasta's stainless-steel-infused PLA. Contain powdered steel. Prints with normal PLA settings (195-220ºC). A heated bed is not required but can be used at 50ºC. This is a dense material that prints as easily as standard PLA but results...
High Quality ABS with an intense dark gray color; 2.85mm diameter filament, 0.75kg spool.
Notice for California Residents:WARNING: Cancer & Reproductive Harm
High Quality ABS with a bright green color; 2.85mm diameter filament, 0.75kg spool.
Notice for California Residents:WARNING: Cancer & Reproductive Harm
High Quality ABS with a bright orange color; 2.85mm diameter filament, 0.75kg spool.
Notice for California Residents:WARNING: Cancer & Reproductive Harm
High Quality ABS with a metallic gold color; 2.85mm diameter filament, 0.75kg spool.
Notice for California Residents:WARNING: Cancer & Reproductive Harm
High Quality ABS with a brilliant red color; 2.85mm diameter filament, 0.75kg spool.
Notice for California Residents:WARNING: Cancer & Reproductive Harm
High Quality ABS with a Bright White color; 2.85mm diameter filament, 0.75kg spool.
Notice for California Residents:WARNING: Cancer & Reproductive Harm
High Quality ABS with a bright yellow color; 2.85mm diameter filament, 0.75kg spool.
Notice for California Residents:WARNING: Cancer & Reproductive Harm
Ultimaker Breakaway (BAM) is a support material for multi-extrusion 3D printing. Breakaway support is quick to remove and does not need further post-processing for a smooth finish on your 3D print. Designed for a hassle-free 3D printing experience, Breakaway provides...
 Using the Ultimaker  cleaning filament is the most effective way to unclog and keep print cores and nozzles in optimal condition. When to use the Ultimaker cleaning filament The Ultimaker  cleaning filament is used for both print core maintenance and...