Bambu Lab H2D Pro Combo

The Bambu Lab H2D AMS 2 Pro Combo 3D printer provides the largest Bambu Lab build area yet, with dual nozzle multi-material printing. The dual nozzle set up allows you to change filaments with less time and material waste for multi-material printing. 

The H2D Pro Combo can print up to 6 materials on a single print in the standard set up. Up to 4 AMS 2 and 8 AMS HT can be attached to a single H2D for up to 24 slots. You can also have 1 external spool and 24 slots for the second nozzle, resulting in up to 25 filament print configurations for beautiful multi-color printing.

The H2D Pro Combo features:

• • Dual-nozzle Multi-material 3D Printing
  • High flow HotEnd allowing for 600mm/s extrusion
  • Optional 10W/40W Laser and Cutting Module (available as an add on)
  • 350mm x 320mm x 325 mm Print Volume total for two nozzles
  • Single Nozzle printing volume: 325mm x 320mm x 325mm
  • Dual Nozzle printing: 300mm x 320mm x 325mm
  • 5μm Resolution Optical Motion Calibration
  • Includes Vision Encoder plate for increased accuracy
  • Includes both the AMS 2 Pro and the AMS HT out of the box
  • All metal hot end with .4mm Tungsten Carbide nozzle
  • Closed-loop Servo Extruder
  • 350°C Nozzle printing temperature
  • 65°C Active Chamber Heating
  • Secure Ethernet and WPA2-Enterprise Wi-Fi connectivity options with a physical network killswitch
  • Adaptive air circulation and HEPA filtration for safer environment operation
  • Filament RunOut Sensor: Yes! 15 sensors on the feed path continuously checking feeding velocity, tension, filament tip location, extruder thermal environment, and dynamic extrusion pressure
  • AI pre-flight check list including: checking for debris across the print surface, self-identifying which nozzles and build plates are in use, and automatically verifying consistency between the detected hardware and slicer parameters
    
  • Spaghetti detection: the A1-backed nozzle camera with macro lens continuously tracks extrusion patterns to immediately detect material accumulation, filament deviation, and extrusion failures. This not only saves you from spaghetti detection, but also print head floods and air printing.
  • Multi Color & Multi Material Capability up to 25 materials when using the maximum number of AMS 2 and AMS HT

This printer uses 1.75mm diameter filament and is compatible with a wide range of materials, including: PLA, PETG, TPU, ABS, ASA, PA6-GF, PC, PPA-CF, and PPS-CF.

FedEx Ground/Home Delivery rates apply for this product if shipping.