$47.00
WHAT: MAGIGOO Metal is designed as a professional first layer adhesive with BASF Ultrafuse® 316L. Magigoo Metal is non-hazardous, non-flammable and also approved for use in post processing stages of BASF Ultrafuse® 316L. Magigoo Metal also enables easy part removal of the green parts from the build-plate.
WHY:
BASF Ultrafuse 316L enables the production of solid 316L-grade stainless steel parts through the use of desktop FDM 3D printers and a sintering process. Ultrafuse® 316L filament consists of highly-refined metal particles embedded in thermoplastic binders. Thus as a filament, the metal-polymer composite comes with none of the occupational and safety hazards associated with the handling of fine metallic powders. This enables affordable, straightforward, and safe3D printing of stainless-steel parts.
Due to the thermoplastic nature of the filament binding materials and the differential thermal cooling during FDM printing, parts printed BASF Ultrafuse® 316L are susceptible to warp. Furthermore due to the delicate nature of the green part, care must be taken when removing parts printed in BASF Ultrafuse® 316L to avoid part deformation. Magigoo Metal provides sure and reliable adhesion during printing and enable the easy removal of the printed part through submersion in water, thus avoid potential damage to the green part.
HOW:
For use of Magigoo Metal with BASF Ultrafuse® 316L a build-plate temperature of 95-105 °C is recommended, nonetheless, the printing conditions might vary between one printer and another.
SAFETY:
Using this product with other than BASF Ultrafuse 316L filaments might cause over adhesion and damage your build surface. Follow the instructions found in the technical data sheet for best results.
For full list of tested material and printer compatibility, please see here.
$15.90
2mm hex head screwdriver. Official Ultimaker spare part. Compatible with the following printers: Ultimaker S7 Ultimaker 2+ Connect Ultimaker S5 Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker Original+ Ultimaker 2 Go Ultimaker 2 Ultimaker...
View full product details$31.50
The perfect size for the prints on the small unheated bed of the Ultimaker 2 Go, each roll has 25 precut-squares of premium Scotch brand blue tape, making it quick, easy and neat to re-cover the print bed. For best...
View full product details$56.00
Filter assembly from Ultimaker for the Ultimaker S7, Ultimaker S5, and Ultimaker 2+ Connect Air Managers. Filters should be replaced after approximately 1500 hours of runtime. This item is currently shipping from the manufacturer and expected back in stock...
View full product details