Regular price
$34.99
Sale price
$34.99
Regular price
Unit price
per
Low Stock
We Accept
Product details
Features & specifications
Bambu Lab PETG-CF is a 1.75mm carbon fiber reinforced PETG filament. The carbon fiber overcomes the low stiffness of regular PETG for improved strength and toughness, and its heat and moisture resistance suit outdoor use. It needs a hardened steel nozzle.
Highlights
- Enhanced strength and stiffness. A solid choice for structural and load-bearing parts.
- Ready for outdoor use. Enhanced resistance to heat and moisture for garden tools and other outdoor projects.
- Carbon fiber finish. A texture that conceals layer lines, with a glossier look than PLA-CF.
- Less clumping and stringing. A premium print surface with improved mechanical properties and high flexibility.
Specifications
| Material | PETG with carbon fiber |
| Diameter | 1.75mm ± 0.03mm |
| Net weight | 1 kg per roll |
| Format | With Bambu reusable spool |
| Printers | All Bambu Lab printers |
| AMS | Compatible with AMS 2 Pro, AMS HT, and AMS. Not compatible with AMS lite |
| Nozzles | Hardened steel nozzle required. A 0.6mm hardened steel nozzle is recommended over 0.4mm to reduce clogging. Stainless steel nozzles are not recommended, and 0.2mm nozzles are not compatible |
| RFID | Print settings are stored on the spool and read automatically by the AMS |
Printing and Care
- Dry thoroughly. This filament absorbs moisture readily. Keep unused filament in a sealed container with desiccant, and dry it thoroughly before printing.
- Get stronger layers. Increase the infill density, avoid open-frame printers, and do not set the cooling fan speed too high, since overcooling weakens layer bonding.
- Get a shinier surface. Use lower printing speeds and slightly higher nozzle temperatures.
- Wear gloves. Carbon fiber filament can produce fine fiber debris, and the filament surface and ends may carry hard microscopic splinters. Wear puncture- and cut-resistant gloves and safety goggles when loading filament, removing supports, cutting, or sanding, and avoid touching rough edges and cross-sections with bare hands.
- Print safely. Use a well-ventilated area, and keep filament and fragments away from children and pets. This filament is not food-grade, so do not use finished prints for food storage or contact.