Regular price
$16.99
Sale price
$16.99
Regular price
Unit price
per
Low Stock
We Accept
Product details
Features & specifications
Bambu Lab PETG Basic is a 1.75mm PETG filament that matches PLA Basic for strength while keeping the impact toughness PETG is known for. It suits functional parts such as brackets, wall hooks, clips, and holders, and prints that live outdoors or around water. It works with every Bambu Lab printer and the full AMS series.
Highlights
- Strong and tough. The upgraded formula reaches PLA Basic bending strength and absorbs noticeably more impact.
- Built for outdoor use. Strong resistance to water, UV, and temperature at an everyday price.
- Cleaner prints. Lower moisture sensitivity than typical PETG means less stringing and smoother surfaces.
- Low emissions. Certified to UL GREENGUARD 2904 for indoor printing.
Mechanical Properties
| Property | PETG Basic | PLA Basic |
|---|---|---|
| Bending strength (XY) | 75 MPa | 76 MPa |
| Layer strength (Z) | 56 MPa | 59 MPa |
| Impact strength (XY) | 34.2 kJ/m² | 20.6 kJ/m² |
Specifications
| Material | PETG |
| Diameter | 1.75mm ± 0.03mm |
| Net weight | 1 kg per roll |
| Format | With Bambu reusable spool, or refill (refills require a spool) |
| Printers | All Bambu Lab printers |
| AMS | Compatible with all AMS series |
| Nozzles and build plates | Compatible with all |
| RFID | Print settings are stored on the spool and read automatically by the AMS |
| Certification | UL GREENGUARD (UL 2904) |
Printing and Care
- Dry before use. If the filament has been exposed to air above 50% relative humidity for more than 72 hours, dry it thoroughly first for the best print quality.
- Let the plate cool. PETG Basic bonds strongly to PEI plates, so wait until the plate cools before removing the print to protect the bottom surface.
- Store it dry. Keep opened rolls in a sealed container with desiccant, away from sunlight and heat.
- Print safely. Use a well-ventilated area, and keep filament and fragments away from children and pets. This filament is not food-grade, so do not use finished prints for food storage or contact.