Bambu Lab H2D 10W Laser Full Combo

In Stock! Order now for same day shipping or pick up.

The Bambu Lab H2D AMS Combo 3D printer provides the largest Bambu Lab build area yet, with dual nozzle multi-material printing. The dual nozzle set up allows you to change filaments with less time and material waste for multi-material printing. 

The H2D AMS Combo can print up to 5 materials on a single print in the standard set up. Up to 4 AMS 2 and 8 AMS HT can be attached to a single H2D for up to 24 slots. You can also have 1 external spool and 24 slots for the second nozzle, resulting in up to 25 filament print configurations for beautiful multi-color printing.

The H2D Combo with 10W Laser features:

• • Dual-nozzle Multi-material 3D Printing
  • 10W Laser and Cutting Module
  • High flow HotEnd allowing for 600mm/s extrusion
    
  • 350mm x 320mm x 325 mm Print Volume total for two nozzles
  • Single Nozzle printing volume: 325mm x 320mm x 325mm
  • Dual Nozzle printing: 300mm x 320mm x 325mm
  • 5μm Resolution Optical Motion Calibration
  • Closed-loop Servo Extruder
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Filament RunOut Sensor: Yes! 15 sensors on the feed path continuously checking feeding velocity, tension, filament tip location, extruder thermal environment, and dynamic extrusion pressure
  • AI pre-flight check list including: checking for debris across the print surface, self-identifying which nozzles and build plates are in use, and automatically verifying consistency between the detected hardware and slicer parameters
  • All metal hot end with .4mm hardened steel nozzle
  • Spaghetti detection: the A1-backed nozzle camera with macro lens continuously tracks extrusion patterns to immediately detect material accumulation, filament deviation, and extrusion failures. This not only saves you from spaghetti detection, but also print head floods and air printing.
  • Multi Color & Multi Material Capability up to 25 materials when using the maximum number of AMS 2 and AMS HT

This printer uses 1.75mm diameter filament and is compatible with a wide range of materials, including: PLA, PETG, TPU, ABS, ASA, PVA, PET, PA, PC, and carbon fiber or glass fiber reinforced filaments.

FedEx Ground/Home Delivery rates apply for this product if shipping. If you prefer to ship via FedEx Freight please email Sales@fbrc8.com for a quote.