H2D Spare Parts
FAT003 - PTFE Tube 4000mm (Cut to Size)
$9.99
The PTFE tubes on your printer, AMS, or AMS Lite reduce resistance and guides your filament. This tubing is intended for 1.75mm diameter filament; the inner diameter of the tube is 2.5mm and the outer diameter is 4mm. This is...
View full product details
FAZ013-N - Bambu 4-in-1 PTFE Adapter
$4.99
The Bambu 4-in-1 PTFE Adapter is an adapter used to connect the PTFE tube. Compared to the original PTFE tube connector, the 4-in-1 adapter can connect 4 feeder modules to the printer at the same time. It can help users to connect...
View full product details
FAH023/FAH060 - HotEnd with Hardened Steel .4mm Nozzle (H2D/H2S/P2S/H2C/X2D)
$20.99
The HotEnd with Hardened Steel .4mm Nozzle is compatible with H2 series. It's perfect for everyday printing in the toughest materials. Engineered for reliability, this HotEnd reduces clogs and maintains fine detail in complex prints, delivering professional-grade results every time....
View full product details
Switching Adapter for AMS 2 Pro
$32.99
If you need to dry the filaments in more than one AMS 2 Pro at the same time, you will need to use the Bambu Lab official Switching Adapter to power the additional AMS 2 Pro.If the X1, P1, A1...
View full product details
AMS HT
$129.00 $159.00
In stock for same day shipping/pick up. The AMS HT allows for air-tight filament storage and active air vent 85ºC filament drying. The AMS HT will read Bambu RFID materials and sync to the printer. Compatible with the following printers:...
View full product details
FAH026/FAH059 - HotEnd with Stainless Steel .2mm Nozzle (H2D/H2S/P2S/H2C/X2D)
$20.99
The HotEnd with Stainless Steel .2mm Nozzle is compatible with the H2D. It's perfect for small and intricate models, with precision that's worth the wait. Engineered for reliability, this HotEnd reduces clogs and maintains fine detail in complex prints, delivering...
View full product details
FAH022 - Silicone Sock for HotEnd x3 (H2D/H2S/H2C)
Sold Out
The Silicone Sock for HotEnd is engineered to provide optimal thermal insulation and protection for your 3D printer's HotEnd. Designed with high-quality silicone, it ensures consistent heat retention while preventing heat loss and potential damage during extended printing sessions. This...
View full product details
FAH024/FAH061 - HotEnd with Hardened Steel .6mm Nozzle (H2D/H2S/P2S/H2C/X2D)
$20.99
The HotEnd with Hardened Steel .6mm Nozzle is compatible with the H2 series. It decreases your print time compared to the standard .4mm nozzle and allows you to print parts quickly and cleanly in the toughest materials. Engineered for reliability,...
View full product details
FAH030 - Bambu High Flow Hardened Steel .4mm HotEnd (H2D/H2S/P2S/H2C/X2D)
$51.99
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5% higher max volumetric speed and reducing print time by up to 30% with ease. The larger your model, the more time you save—especially for prints...
View full product details
FAP031 - Vision Encoder (H2 Series)
$105.00
Take your 3D printing accuracy to the next level with the Bambu Lab Vision Encoder. This advanced calibration tool enhances motion accuracy to below 50μm, compensating for natural mechanical variances and long-term wear across machines. This calibration is distance-independent, ensuring...
View full product details
FAH028 - HotEnd Heating Assembly Left (H2D/H2C)
$30.00
The Hotend Heating Assembly is designed to heat the hotend and enable quick hotend replacement. The heating assembly secures the hotend with a clamping mechanism, allowing easy removal for maintenance or replacement. What's in the box? HotEnd Heating Assembly -...
View full product details
FAH025/FAH062 - HotEnd with Hardened Steel .8mm Nozzle (H2D/H2S/P2S/H2C/X2D)
$20.99
The HotEnd with Hardened Steel .8mm Nozzle is compatible with the H2 series. This size nozzle gives you the fastest printing for the toughest materials. Engineered for reliability, this HotEnd reduces clogs and maintains fine detail in complex prints, delivering...
View full product detailsFAH029 - HotEnd Heating Assembly Right (H2D)
$30.00
The Hotend Heating Assembly is designed to heat the hotend and enable quick hotend replacement. The heating assembly secures the hotend with a clamping mechanism, allowing easy removal for maintenance or replacement. What's in the box? HotEnd Heating Assembly -...
View full product details
CAB035 - 6 Pin Cable (1100mm) (AMS 2 Pro/AMS HT/AMS)
$5.99
The H2 and P2S printers can be directly connected to the AMS 2 Pro or AMS HT using Bambu Bus Cable - 6pin.
View full product details
FAP025 - Bambu Textured PEI Plate (H2D/H2S)
$61.99
The Bambu Textured PEI Plate is designed to provide a uniquely textured build surface that enhances adhesion and reduces warping for optimal 3D printing results. This bed is compatible with the Bambu Lab H2 series, its innovative finish improves first-layer...
View full product details
FAW005 - Nozzle Wiping Pad x5 (H2D)
$6.99
The Nozzle Wiping Pad is installed on the nozzle wiper part of the purge wiper and is used to remove residual waste on the nozzle. It is made of soft silicone material to ensure good contact with the hotend during...
View full product details
SP001 - Smoke Purifier
$551.65 $649.00
Estimated shipping 2-3 days from order. The smoke purifier is the perfect add on for your H2D Full Laser Combo or add on with a Laser Upgrade Kit for your H2D Pro or H2S Combo. Multi-Stage Filtration: Filter Out 99% of...
View full product details
Bambu Lubricant Grease
$3.99
Lubricant Grease is used to lubricate lead screws, or to eliminate noise issues between belts and idle pulleys. Currently, Lubricant Grease come in two different packaging forms (randomly distributed) with the same gram weight.
View full product details
FAZ031 - Bambu Lubricant Oil x6
$5.99
Lubricant Oil is typically used for the lubrication of linear guides, slide rails, and steel shafts. Theoretically, Lubricant Oil can also be used for lead screw lubrication, but since Lubricant Oil is prone to evaporation, this would require more frequent...
View full product details
Bambu Matte Heat Transfer Vinyl (10 pieces)
$13.89
Bambu Matte Heat Transfer Vinyl features a matte texture and a variety of vibrant color options. It is easy to cut and weed without leaving residue, while still able to stick strongly to the surface you apply it to. It...
View full product details
FAH032/FAH065 - Bambu High Flow Hardened Steel .8mm HotEnd (H2D/H2S/P2S/H2C/X2D)
$51.99
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2 with ease. The larger your model, the more time you save—especially for prints...
View full product details
FAH048 - Silicone Sock for HotEnd x3 (P2S/X2D/H2D/H2S/H2C left)
$2.99
The Silicone Sock for HotEnd is engineered to provide optimal thermal insulation and protection for your 3D printer's HotEnd. Designed with high-quality silicone, it ensures consistent heat retention while preventing heat loss and potential damage during extended printing sessions. This...
View full product details
FAH040 - Tungsten Carbide Nozzle .4mm
$59.99
With HRA 90 compared to hardened steel's 74, the Tungsten Carbide nozzle provides exceptional wear resistance.This results in a 50% increase in lifespan when printing abrasive, high-performance fiber-reinforced filaments. The special design of hotend heating assembly enables easy separation of...
View full product details
FAC095 - Replacement Filament Cutter x3 (H2D)
$3.99
The filament can be cut to prevent the supplies from clogging. When used with AMS, it assists with multi-material switching.
View full product details
TPU Assist Module
Sold Out
Printing TPU has traditionally been a challenge due to the filament's inherent elasticity and high friction. To ensure a smooth extrusion, the feed path must be as short and direct as possible. The TPU Feed Assist Module eliminates the struggle by providing...
View full product details
FAP038 - Engineering Plate (H2D/H2S)
Sold Out
The Engineering Plate provides a smooth surface optimized for high temperature filaments when paired with glue or Magigoo for printing. With a simple layer of glue, the Engineering Plate is compatible with the entire Bambu filament lineup. The durable smooth...
View full product details
FAH031/FAH064 - Bambu High Flow Hardened Steel .6mm HotEnd (H2D/H2S/P2S/H2C/X2D)
$51.99
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5% higher max volumetric speed and reducing print time by up to 30% with ease. The larger your model, the more time you save—especially for...
View full product details
FAP028 - LightGrip Cutting Mat (H2D)
$5.99
Ideal for lighter materials such as regular cardstock and paper. Provides gentle adhesion for easy removal.
View full product details
FAC100 - Purge Wiper (H2D)
$19.99
The Purge Wiper, positioned above the left inner liner, is used to clean the nozzle and for removing waste filament during printing.
View full product details
SCA003 - Fine Point Blade x5 (H2D)
$19.99
The Fine Point Blade is used for performing precise cutting tasks with the cutting module for the H2D Full Laser Combo printers.
View full product details
FAP027 - StrongGrip Cutting Mat (H2D)
$5.99
Designed for heavy materials like leather and thick card stock. Its strong adhesive ensures secure holding during cutting.
View full product details
SAA035 - Feeder Unit (AMS 2 Pro)
Sold Out
The AMS 2 Pro Feeder Unit is specially designed to support the AMS 2 Pro for printing multiple colors and materials. Ceramic-reinforced antiwear bushings are embedded in each feeder inlet to better protect the inlet from being worn by the...
View full product details
40W Laser Module
Sold Out
The Laser Module is only compatible with the H2D Laser version. In order to upgrade a non-laser H2D to the laser version, you will also need the laser upgrade kit; please reach out to Sales@fbrc8.com if the laser upgrade kit is needed.
View full product details
FAC125 - Flow Blocker x3 (H2D/H2C)
$9.99
The flow blocker the metallic part installed on the toolhead that seals the inactive nozzle to prevent oozing during printing. Replacement instructions are available here. What's in the box: 3x flow blockers H2D/H2C compatible 3x MG2.5-8 screws
View full product details
FAP030 - Laser Base (H2D)
$69.99
The Laser Base serves as the working platform for laser engraving/cutting. It works with support strips to hold engraving/cutting materials, limit flames and smoke generated during the process, and collect debris produced during operation. Comes with laser base and 6...
View full product details10W Laser Module
$299.00
The 10W laser module can be added to an H2D, H2S, or H2C printer with the laser upgrade kit or a H2 printer that is already the full laser version. For questions, please reach out to sales@fbrc8.com.
View full product details
FAP029 - Cutting Platform (H2D)
$23.99
The Cutting Platform is a steel plate with StrongGrip Cutting Mat and LightGrip Cutting Mat attached, used to secure materials and provide a stable cutting surface.
View full product details