ultimaker
Aluminum Hot End Holder (UMO/UMO+)
$19.40
The aluminum hot end holder is an official Ultimaker spare part for the Ultimaker Original and Ultimaker Original+.
View full product details
Bearing Housing Bottom (UM3/UM3X)
$9.99
Bottom part of the print head housing to which the side fan bracket is secured. OEM UltiMaker part for: UltiMaker 3 UltiMaker 3 Extended
View full product details
Bearing Housing Middle (S5)
$9.99
 Middle part of the print head housing. OEM UltiMaker part for: UltiMaker S5 R1
View full product details
Bed Spring (UMO+/UM2/UM2X/UM2+/UM2X+)
$9.99
Spring used in the build plate assembly for the Ultimaker 2 series and Ultimaker Original+ printers. Official UltiMaker spare part for the following machines: Ultimaker Original+ Ultimaker 2 Ultimaker 2 Extended Ultimaker 2 Go Ultimaker 2+ Ultimaker 2 Extended+
View full product details
Cable Cover (UM2/UM2+)
$30.10
Metal cover shielding the motors and cables for the Ultimaker 2 and Ultimaker 2+. Official Ultimaker Spare Part.
View full product details
Cable Cover (UM3/UM2C)
$23.00
Ultimaker official spare part for the Ultimaker 3 and Ultimaker 2+ Connect. Not compatible with any other model of Ultimaker printer.
View full product details
Connectivity Board (UM2C)
$209.00
Connectivity board for the Ultimaker 2+ Connect, with USB port, display connectors, and Onion connectivity module. Not compatible with any other machines.
View full product details
Cooling Rib Hot End (UM2/Ext/Go/+/Connect)
$21.80
Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2 Go
View full product details
Double Ribbon Display Cable (UM3/UM2/UMO+)
$31.40
This cable connects your Ulticontroller to the red Olimex board on your Ultimaker 3 series printer, or can be used to connect the Ulitcontroller to the main board on your Ultimaker 2 series or Ultimaker Original+ printer. OEM part for the following printers: Ultimaker...
View full product details
Ethernet Cable Panel Mount (S5/S3/UM2C)
$18.00
Internal Ethernet cable between the LAN port at the back of the printer and the electronics.
View full product details
Feeder (UM2C)
$107.00
Official spare part for the Ultimaker 2+ Connect. Compatible with the Ultimaker 2+ Connect; not compatible with Ultimaker 2 series or Ultimaker 3 series. For those machines, please use the Ultimaker 2+/Ultimaker 3 feeder.
View full product details
Feeder 2 (UM3/UM3X)
$107.00
This is the assembled Feeder 2 unit, located on left side of the printer, as viewed from the back of the machine. Official Ultimaker spare part, compatible with the following machines: Ultimaker 3 Ultimaker 3 Extended
View full product details
Feeder Ring x2 (UM3/UM2+)
$19.98
This metal ring sits at the bottom of your Ultimaker 2 series or Ultimaker 3 series feeder, preventing wear and tear to the feeder housing.  Compatible with the following models: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended...
View full product details
Gantry Spacer 8.2x10x10
$9.99
10mm pulley spacer for the XY gantry. OEM UltiMaker part for the following printers: UltiMaker S5 R1 UltiMaker 2+ Connect UltiMaker 2+ UltiMaker 2 Extended+ UltiMaker 2 UltiMaker 2 Extended UltiMaker 2 Go
View full product details
Glass Clips x2 (UM3/2/Go/Ext/+/UMO+)
$19.98
A pair of the spring clips for holding the glass in place. These clips can be used on all 4 corners of the bed, or on the back two corners as preferred. These are official Ultimaker spare parts, compatible with the following...
View full product details
Heated Bed Cable (UM2+/Ext+/UMO+)
$22.40
This is the cable that runs between the main electronics and the heated bed panel on the Ultimaker 2+, Ultimaker 2 Extended+, and Ultimaker Original+. This is an updated version of the cable, released in 2016. If your heated bed...
View full product details
Heated Bed with Cable (S3)
$199.00 $229.20
OEM aluminum plate with heater mat, cable, and heat resistant zip tie for the UltiMaker S3. This product is not compatible with any other models of UltiMaker printers.
View full product details
Hot End Holder Bottom
$23.60
Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2 Go
View full product details
Model Cooling Fan 12VDC (x2) (UM2/Go/Ext/UM2+/Connect)
$33.40
Official Ultimaker Spare Parts for Ultimaker² series printers; a pair of 12V DC 0.1A fans, as used for the side fans on all Ultimaker 2/Ultimaker 2+ series printers. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker...
View full product details
Nozzle Seal Adapter (S3/S5/S7)
$10.60
Metal nozzle seal adapter for S7, S5, and S3 printheads. This piece is critical for ensuring that your nozzle seal can be properly seated at the bottom of the printhead.
View full product details
Power Adaptor 19v 120W (UMO)
$60.00
Ultimaker Original Power Adaptor, including US 3-pin cable. Not compatible with UMO+ or Ultimaker 2 series printers. An official Ultimaker Spare Part.
View full product details
Power Cable US Type C13 (UM2/UM3/S7/S5/S3/UMO+)
$25.40
The Power Cable US Type C13 is an official Ultimaker Spare Part. This power cable is compatible with the following models of Ultimaker printers: Ultimaker S7 Ultimaker S5 Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Extended+ Ultimaker 2+...
View full product details
Print Head Linear Bearing Pack (UM2/Go/Ext//ConnectOriginal/UMO+)
$36.50
Official Ultimaker Spare Parts for all Ultimaker Original and Ultimaker 2 family printers: Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2+ Connect Ultimaker 2 Go Ultimaker Original Ultimaker Original+ This is a pack of two LM6LUU linear...
View full product details
Print Table Base Plate (UM3/UM3X/UM2C)
$85.25
Curved aluminum base plate, 3 mm thick, for the Z stage. OEM UltiMaker spare part for the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Connect
View full product details
Printhead Screw 75mm (x4) (UM3/UM3X/S5/S3/S7)
$10.00
Four DIN912 M2.5x75 screws are used on the printhead for your Ultimaker 3 series or Ultimaker S-Line machine. These screws are compatible with the following machines: Ultimaker 3 Ultimaker 3 Extended Ultimaker S5 Ultimaker S3 Ultimaker S7
View full product details
Printhead Thumbscrew Pack (UM2/UM2+)
$39.96
UltiMaker original part. Set of 4 thumbscrews for the printhead, compatible with the following machines: Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2 Go
View full product details
Safety Glass Clips (UM2/UM3/UMO+/S3/S5/Connect)
$27.70
Safety glass clips, one each for the left and right front corners of the bed plate. Official Ultimaker spare part, can be used with the following Ultimaker printers: Ultimaker S5 Ultimaker S3 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+...
View full product details
Single Pulley Assembly (Gear Ratio) UMS5/S3
$25.40
The single pulley assembly (Gear Ratio), assembled with a set screw, is used on the Ultimaker S-Line printers. This is an official Ultimaker part for the following machines: Ultimaker S3 Ultimaker S5 Ultimaker S7
View full product details
UltiController Kit (UMO)
$116.25
Kit of parts needed to add a control interface and USB card reader to an Ultimaker Original, or repair/replace the Ulticontroller on an Ultimaker Original+. Avoids the need to keep the printer tethered to a computer during printing. Requires a...
View full product details
Ultimaker BB Print Core (0.8mm) (UM3/S5/S3/S7/Factor4)
$169.00
A genuine 'BB' style Ultimaker Print Core with a 0.8mm nozzle, for printing PVA support material. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Ultimaker S7 UltiMaker Factor 4 Â
View full product details
UltiMaker Factor 4
$16,500.00 $19,500.00
UltiMaker Factor 4, UltiMaker's new industrial-grade 3D printer, streamlines production, simplifies processes, and keeps operations running. With support for engineering materials, direct dual extrusion, onboard print process reporting, and many more innovations, it achieves unrivaled predictability and minimal variance. Â ...
View full product details
UltiMaker Material Station (S5/S7)
$3,799.00
Integrated composite-ready filament management solution for the UltiMaker S5 and UltiMaker S7 3D printers, providing humidity-controlled storage with automated detection and switching for all UltiMaker filament, and support for additional third-party filaments being added regularly. The Material Station can store...
View full product details
UltiMaker PPSCF
$71.50 $110.00
UltiMaker PPS CF is a semi-crystalline thermoplastic reinforced with high-quality carbon fiber to provide outstanding tensile strength and stiffness to your 3D printed parts. UltiMaker PPS CF also provides a high-performing alternative to steel or aluminum for less-demanding parts. Compatible...
View full product details
Ultimaker Print Core CC .6mm (S3/S5/S7/Factor4)
$299.00
 Ultimaker’s CC 0.6 mm Print Core enables you to print using abrasive materials on your Ultimaker S-Series or Factor 4 3D printer. This new print core contains a highly wear-resistant hardened steel nozzle and titanium heat break, making them...
View full product details
Ultimaker Print Core HT .6mm (Factor 4)
$349.00
Ultimaker’s HT 0.6 mm Print Core enables you to high temperature materials on your UltiMaker Factor 4 up to 340C, including UltiMaker PPS CF. This product is officially supported for the UltiMaker Factor 4 printer only.
View full product details
Ultimaker PVA 750g
$64.96 $99.95
For Dissolvable Supports High quality PVA for use with dissolvable supports. Compatible with Ultimaker PLA, CPE, PETG, and Nylon. Ultimaker PVA dissolves in water with no chemicals needed, leaving a clean print behind. 2.85mm diameter filament, 0.750kg spool. Also available...
View full product details
UltiMaker S3
$2,999.00 $4,450.00
Click and print with 190+ materials 3D printing with the world's most advanced filaments. Create strong parts using polymers reinforced with composite materials. Combine the S3 with the Metal Expansion Kit and an enclosure to prototype functional stainless steel parts....
View full product details
UltiMaker S7
$5,999.00 $8,299.00
The UltiMaker S7 can be trusted to do its job, giving you the freedom to do yours. The inductive sensor-enabled bed leveling of the S7 ensures a perfect first layer and the integrated air manager maintains the build volume at...
View full product details
UltiMaker S7 Probundle
$9,300.00
The UltiMaker S7 can be trusted to do its job, giving you the freedom to do yours. The inductive sensor-enabled bed leveling of the S7 ensures a perfect first layer and the integrated air manager maintains the build volume at...
View full product details
Wifi Antenna (UM3/UM3X/UMS5)
$9.99
Official spare part for Ultimaker. Wifi antenna for the following machines: Ultimaker 3 Ultimaker 3 Extended Ultimaker S5 R1 (Robots on the side panel) NOTÂ compatible with the Ultimaker S5 R2, S3, or S7.
View full product details
XY Motor Assembly (S7/S5/S3/UM2C)
Sold Out
XY Motor assembly for Ultimaker S7, Ultimaker S5, Ultimaker S3, and Ultimaker 2+ Connect printers. Official Ultimaker spare part.
View full product details
Z-Motor Cable L160 (S3/S5/S7/UM2C)
$10.00
Motor cable with length 160 mm. Used for the Z motor (203828 or 215582).
View full product details