The following parts are compatible with the Ultimaker 2+, and Ultimaker 2+ Extended.
If you're unsure about the compatibility of a particular part, or do not see something here that you need, please reach out our team at Sales@fbrc8.com and we'll be happy to assist you.
If you have an Ultimaker 2, Ultimaker 2 Extended, or Ultimaker 2 Go please see this collection.
If you have an Ultimaker 2+ Connect, please see this collection.
Bowden Tube w/ Collets & Clips L750 (S3/UM3/UM2/UMO+/Connect)
$29.00
Official Ultimaker Spare Parts. Compatible with the following printers: * Ultimaker 2+ Connect* Ultimaker S3* Ultimaker 3* Ultimaker 3 Extended* Ultimaker 2+* Ultimaker 2 Extended+* Ultimaker 2 * Ultimaker 2 Extended * Ultimaker Original* Ultimaker Original+ Includes 2 x Retaining Collets...
View full product details
TFM Isolator Coupler (UM2/UM2+/Go/Ext/Ext+/Connect) (Replaces PTFE Coupler)
$23.00
This coupler sits between the Bowden tube and nozzle block on an Ultimaker 2+/Extended+/2+ Connect. First introduced with the Ultimaker 2+ series printers, this part is also compatible with the Ultimaker 2, 2 Go, and Extended, and offers extended service compared...
View full product details
Glass Print Bed (UM2/UM3/UMO+/S3/Connect)
Sold Out
Glass print bed approximately 9" x 10". Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Ultimaker 2 Extended Ultimaker Original+ Ultimaker Original with Official...
View full product details
Timing Belt 200 x2 (UM2/UM3/S5/S3/S7/Connect)
$19.98
These are the short belts that connect the X and Y motors to the axes. Official Ultimaker Spare Parts for the following printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended Ultimaker S5...
View full product details
Sliding Block Set (UM2/Extended/+)
$47.00
Official Ultimaker Spare Parts for the Ultimaker 2 series printers. This is a complete set of 4 sliding blocks and long belts. Compatible with the following models of Ultimaker printer: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Ultimaker 2 Extended Not...
View full product details
Hot-End Cooling Fan (UM2/Go/Ext/UM2+/Connect)
$19.15
Official Ultimaker Spare Parts for Ultimaker² series printers; the 5VDC 0.08A rear fan on Ultimaker 2 Series printers that cools the printhead. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker...
View full product details
Heater Cartridge (UM2+/Ext+ - 24V 35W)
$55.40
Official Ultimaker Spare Parts for Ultimaker 2+ and Extended+ printers. This heater cartridge is 24V, 35W. Note: This is not compatible with the (non-Plus) Ultimaker 2, Ultimaker 2 Extended, Ultimaker Original/+, Ultimaker 2Go or Ultimaker 2+ Connect printers.
View full product details
UM2 Extrusion Upgrade Kit (UM2/Ext)
$395.00
The new Extrusion Upgrade Kit lets you turn your Ultimaker 2 into an Ultimaker 2+. Once done, you’ll have the very latest 3D printing technology at your fingertips. There’s a geared feeder for increased reliability. Swappable nozzles for greater control....
View full product details
Heated Bed Panel and Cable(UMO+/UM2/UM2C/UM3)
$120.00
OEM heated bed panel and cable for the Ultimaker 2+ Connect. The bed and cable set is compatible with the following machines: Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker2 Extended+ Ultimaker Original+ (and the Ultimaker Original with Official Heated Bed Upgrade...
View full product details
Printhead Temperature Sensor (PT100B 'Glassfiber' for UM2+/Extended+)
$57.80
This is the official Ultimaker spare part for the Ultimaker 2+ and Ultimaker 2 Extended+ printers. Note: This is not compatible with the (non-Plus) Ultimaker 2, Ultimaker 2 Extended, Ultimaker Original/+, Ultimaker 2Go or Ultimaker 2+ Connect printers.
View full product details
XY Axis Stepper Motor (UM2/UM2X/UM2+/UM2X+/3/3X/Go)
Sold Out
Stepper motor for X & Y axes of Ultimaker 2, 2X, 2+, 2X+, 3, 3X, and Ultimaker 2Go. An official Ultimaker Spare Part, sold per motor.
View full product details
The Olsson Ruby Nozzle
$90.00
One nozzle for all materials. The ruby tip provides exceptional wear resistance for printing with abrasive materials such as metal- or carbon-fiber-filled filaments, or glow-in-the-dark plastics, while retaining the exceptional thermal characteristics of a primarily brass nozzle. It also prints...
View full product details
Model Cooling Fan 12VDC (x2) (UM2/Go/Ext/UM2+/Connect)
$33.40
Official Ultimaker Spare Parts for Ultimaker² series printers; a pair of 12V DC 0.1A fans, as used for the side fans on all Ultimaker 2/Ultimaker 2+ series printers. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker...
View full product details
Endstop Limit Switch (Y-Axis) (UM2/UM3/+/Go/Ext)
Sold Out
Y-axis end stop limit switch (Red Wire). Official Ultimaker Spare Parts compatible with the following Ultimaker printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended Note: NOT compatible with the UMO/UMO+, S7,...
View full product details
OLED Display (UM2/UM3)
$40.40
This white-on-black OLED display panel is an Official Ultimaker spare part. This part compatible with the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended
View full product details
Electronics Board (UM2+/UM2Ext+/UM2/Um2Ext/UM2Go/UMO+)
$359.00
Main electronics board for the Ultimaker 2 series and Original+ printers, including the board and safety jumpers. The metal cover for the electronics board is available. Official Ultimaker Spare Parts for: Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker 2...
View full product details
Endstop Limit Switch (X-Axis) (UM2/UM3/+/Go/Ext)
Sold Out
X-Axis end stop switch (Blue wire). Official Ultimaker spare part compatible with the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Note: NOT compatible with the UMO/UMO+, S5, S3, or Ultimaker 2+ Connect.
View full product details
fbrc8 Strong Collet & Clip (2 each) S5/S3/UM3/UM2(+)/UMO+
$7.50
A pair of strong Bowden tube collets and blue retaining clips compatible with all Ultimaker series of machines. These collets have thick teeth to provide additional grip on the bowden tube for the most reliable printing experience. When installed in...
View full product details
Hot End Isolator Nut (UM2/2+/Go/Ext/Ext+/UM2C)
$38.00
Official Ultimaker Spare Part: the Isolator Nut that connects the heater block to the TFM coupler and Bowden Tube. Compatible with the following Ultimaker printers: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker 2 Ultimaker 2...
View full product details
Olsson Block Nozzle - Brass - 0.6mm
$11.00
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The larger 0.6mm opening size allows for faster volumetric print speeds than the standard 0.4mm nozzle.
View full product details
Power Adapter 24v-220w and Cable (UM3/UM2/UMO+/Connect)
$195.60
Official Ultimaker 24V Power Supply for the Ultimaker 2 series, Ultimaker Original+, and Ultimaker 3 series printers. Includes cable for standard US-style 3-pin wall socket. Compatible with the following machines: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2+ Extended Ultimaker 2 Ultimaker 2...
View full product details
Endstop Limit Switch (Z-Axis) (UM2/UM3/Ext)
Sold Out
Z-axis endstop limit switch, with short, black wire. Official Ultimaker Spare Part for the following printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Ultimaker 2 Extended Note: NOT compatible with the S7, S5, S3, or Ultimaker 2+...
View full product details
Machine Oil (UM2/UM3/UMO/+/Ext/Go/S5/S3)
$18.00
Light machine oil like sewing machine oil should be applied regularly to all of the smooth axis rods on your printer to keep everything in smooth operation. Compatible on the following printer models: Ultimaker S7 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker...
View full product details
Steel Nozzle - 0.5mm
$13.00
This nozzle fits the Olsson block set, and provides a more wear-resistant tip that is better suited to printing with abrasive materials like Stainless Steel, or Carbon Fiber filaments. *Note: the opening in these nozzles is 0.5mm - some earlier...
View full product details
Magnalube Grease (UM2/UM3/UMO/+/Ext/Go/S5)
$12.10
Thick green machine grease used for lubricating the trapezoidal lead screw on your printer and ensuring smooth movements on the Z-axis. Compatible on the following printer models: UltiMaker S7 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker...
View full product details
Hot End Pack (UM2+/UM2X+)
$191.59
This pack contains the .4mm brass Olsson nozzle, TFM coupler, Isolator Nut, Isolator Spacer, Glassfiber Temperature Sensor, and Olsson block with washer and M3x16 screw. All parts are official Ultimaker spare parts. Note: This is not compatible with the (non-Plus) Ultimaker 2, Ultimaker 2...
View full product details
Olsson Block Nozzle - Brass - 0.8mm
$11.00
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The larger 0.8mm opening size allows for faster volumetric print speeds than the standard 0.4mm nozzle.
View full product details
Glass Clips x2 (UM3/2/Go/Ext/+/UMO+)
$19.98
A pair of the spring clips for holding the glass in place. These clips can be used on all 4 corners of the bed, or on the back two corners as preferred. These are official Ultimaker spare parts, compatible with the following...
View full product details
Ulticontroller/Display Board (UM2+/UM2X+/UM2/UM2X/UM2Go)
$95.00
The display and control electronics board for Ultimaker 2+ and 2 series printers. Not compatible with the Ultimaker Original or Original+. This is an official Ultimaker-sourced spare part. Note: this item is currently shipping directly from the manufacturer.
View full product details
Print Head Linear Bearing Pack (UM2/Go/Ext//ConnectOriginal/UMO+)
$36.50
Official Ultimaker Spare Parts for all Ultimaker Original and Ultimaker 2 family printers: Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2+ Connect Ultimaker 2 Go Ultimaker Original Ultimaker Original+ This is a pack of two LM6LUU linear...
View full product details
Olsson Block Nozzle - Brass - 0.25mm
$11.00
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The smaller 0.25mm opening size allows for finer detail in the X/Y plane, compared to the standard 0.4mm nozzle, however,...
View full product details
Fan Bracket (UM2+/UM2X+/Connect)
$41.00
Replacement fan bracket for the Ultimaker 2+ series printers; can also be used on Ultimaker 2/Ext/Go printers. An official Ultimaker Spare Part.
View full product details
Feeder 1 (UM2+/UM3)
$107.00
Feeder assembly for the left feeder/feeder 1. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Ultimaker 2+ Extended Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 with Extrusion Upgrade Kit Ultimaker 2 Extended with Extrusion Upgrade Kit This item is...
View full product details
Safety Glass Clips (UM2/UM3/UMO+/S3/S5/Connect)
$27.70
Safety glass clips, one each for the left and right front corners of the bed plate. Official Ultimaker spare part, can be used with the following Ultimaker printers: Ultimaker S5 Ultimaker S3 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+...
View full product details
2mm Hex Head Screwdriver (UM2/UM3/S5/S3/UMO/+)
$15.90
2mm hex head screwdriver. Official Ultimaker spare part. Compatible with the following printers: Ultimaker S7 Ultimaker 2+ Connect Ultimaker S5 Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker Original+ Ultimaker 2 Go Ultimaker 2 Ultimaker...
View full product details
Heated Bed Cable (UM2+/Ext+/UMO+)
$22.40
This is the cable that runs between the main electronics and the heated bed panel on the Ultimaker 2+, Ultimaker 2 Extended+, and Ultimaker Original+. This is an updated version of the cable, released in 2016. If your heated bed...
View full product details
Ultimaker 2 Isolator Spacer 9.4mm (UM2+/UM2X+/Connect)
$9.99
This 9.4mm spacer sits between hot end holder top and TFM coupler on the UM2+/UM2X+ printhead. It can replace the printhead spring on the UM2Go/UM2/UM2X. Official Ultimaker spare part, compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker...
View full product details
Z-Motor with Trapezoidal Lead Screw and Nut (UM3/UM2/UMO+)
Sold Out
Official Ultimaker Spare Parts. Compatible with: Ultimaker 2 Ultimaker 2+ Ultimaker 3 Ultimaker Original+ Not compatible with Ultimaker 2 Extended, Ultimaker 2Go, Ultimaker 2 Extended+, Ultimaker Original, Ultimaker 2+ Connect, or S-line printers.
View full product details
Pulley 8mm Assembly (UM2/UM3/S5/S3)
$13.40
The 8mm single pulley, assembled with a set screw, is used on all Ultimaker 2 series, Ultimaker 3 series, and Ultimaker S-Line printers. This is an official Ultimaker part for the following machines: Ultimaker 2+ Connect Ultimaker S3 Ultimaker S5...
View full product details
LED Strip Cold White (UM2/UM2+)
$27.80
Official Ultimaker Spare Parts for Ultimaker 2 and Ultimaker 2+ printers.
View full product details
Hot End Holder Bottom
$23.60
Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2 Go
View full product details
Pulley 5mm Assembly (UM2/UM3/S5/S3)
Sold Out
The 5mm pulley, assembled with a set screw, is used on all Ultimaker 2 series, Ultimaker 3 series, and Ultimaker S-Line printers. This is an official Ultimaker part for the following machines: UltiMaker S7 UltiMaker S5 Ultimaker S3 Ultimaker S5...
View full product details
Feeder Ring x2 (UM3/UM2+)
$19.98
This metal ring sits at the bottom of your Ultimaker 2 series or Ultimaker 3 series feeder, preventing wear and tear to the feeder housing. Compatible with the following models: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended...
View full product details
Ultimaker 2+ Maintenance Kit (MK)
$225.00 $435.00
Over $150 in savings if you purchase the Ultimaker 2+ Maintenance Kit instead of buying the parts separately. Save now! Our comprehensive Maintenance Kit contains everything you need to maintain your Ultimaker 2+ and Ultimaker 2 Extended+ with ease and...
View full product details
Cooling Rib Hot End (UM2/Ext/Go/+/Connect)
$21.80
Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2 Go
View full product details
Double Pulley Assembly (UM2/UM3)
$20.60
The 8mm double pulley, assembled with a set screw, is used on all Ultimaker 2 series and Ultimaker 3 series printers. This is an official Ultimaker part for the following machines: Ultimaker 2+ Connect Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker...
View full product details
Olsson Block Nozzle - Brass - 0.4mm
$17.80
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+) and is a direct replacement for the standard 0.4 nozzle tip. Compatible with the: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2+ Connect Ultimaker 2 with Extrusion...
View full product details
Z-Motor with Trapezoidal Lead Screw and Nut (UM2X/UM3X)
Sold Out
Official Ultimaker Spare Parts for Ultimaker Extended printers. Compatible with: Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 3 Extended Not compatible with the Ultimaker 2, Ultimaker 2Go, Ultimaker Original(+), Ultimaker 2+ Connect, or S-line machines.
View full product details