Parts
Acrylic Bed/Build Plate (UMO)
$51.30
Replacement acrylic bed for the Ultimaker Original. This is an official Ultimaker spare part.
View full product details
Adhesion Sheets
$25.00
Self-adhesive sheets for the print bed to improve the adhesion of some materials. Pack contains 25 sheets.
View full product details
Adhesion Sheets (S5)
$34.95
Self-adhesive sheets for the print bed to improve the adhesion of some materials. Pack contains 25 sheets. These sheets are sized for the Ultimaker S5 printer.
View full product details
Air Manager UMB Cable
$25.10
Official Ultimaker UMB (Ultibus) cable for the Ultimaker S5 Air Manager.
View full product details
Belts Pack (UMO/+)
Sold Out
Official Ultimaker Spare Parts for the Ultimaker Original and Original+. Complete set of 4 long and 2 short MXL belts. Not compatible with Ultimaker 2.
View full product details
Bowden Tube w/ Collets & Clips (S3/UM3/UM2/UMO+/Connect)
$24.00
Official Ultimaker Spare Parts. Compatible with the following printers: * Ultimaker 2+ Connect* Ultimaker S3* Ultimaker 3* Ultimaker 3 Extended* Ultimaker 2+* Ultimaker 2 Extended+* Ultimaker 2 * Ultimaker 2 Extended * Ultimaker Original* Ultimaker Original+ Includes 2 x Retaining Collets...
View full product details
Bowden Tube with Collets and Clips (S5/S7)
$27.50
Official spare part for the Ultimaker S5 and S7. Contains Ultimaker S5 bowden tube, 2 collets, and 2 clamp clips. Compatible with the Ultimaker S5 and S7 only; not compatible with Ultimaker 2 series, Ultimaker 3 series, or S3 printers. For those...
View full product details
Boxed Filter Assembly (Air Manager)
$51.00
Filter assembly from Ultimaker for the Ultimaker S7, Ultimaker S5,  and Ultimaker 2+ Connect Air Managers. Filters should be replaced after approximately 1500 hours of runtime.
View full product details
Cable Cover (UM3/UM2C)
$18.00
Ultimaker official spare part for the Ultimaker 3 and Ultimaker 2+ Connect. Not compatible with any other model of Ultimaker printer.
View full product details
Cable Cover (UM3X)
$40.80
Ultimaker official spare part for the Ultimaker 3 Extended. Not compatible with any other model of Ultimaker printer.
View full product details
Camera Assembly (S5/S3)
$69.60
Camera assembly for the Ultimaker S5 and Ultimaker S3 printer. Official Ultimaker spare part. Installation instructions are available here.
View full product details
Capacitive Sensor Parts (UM3/UM3X)
$96.75
This is a replacement metal bracket with capacitive sensor board and capacitive sensor cable for Ultimaker 3 and Ultimaker 3 Extended printers. This part uses an updated design with a metal bracket, nozzle seal, and metal nozzle seal adapter. Compatible...
View full product details
Capacitive Sensor Parts (UMS5/S3)
$66.00
Replacement metal bracket with capacitive sensor board and capacitive sensor cable for Ultimaker S5 and Ultimaker S3 printers.
View full product details
Cooling Rib Hot End (UM2/Ext/Go/+/Connect)
$16.80
Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2 Go
View full product details
Decoupler Assembly (MS)
$44.55
OEM Decoupler assembly for the Ultimaker Material Station.
View full product details
Double Pulley Assembly (Gear Ratio) UMS5/S3
$37.20
The double pulley assembly (Gear Ratio), assembled with a set screw, is used on the Ultimaker S-Line printers. This is an official Ultimaker part for the following machines: Ultimaker S3 Ultimaker S5
View full product details
Double Pulley Assembly (UM2/UM3)
$15.60
The 8mm double pulley, assembled with a set screw, is used on all Ultimaker 2 series and Ultimaker 3 series printers. This is an official Ultimaker part for the following machines: Ultimaker 2+ Connect Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker...
View full product details
Double Ribbon Display Cable (UM3/UM2/UMO+)
$26.40
This cable connects your Ulticontroller to the red Olimex board on your Ultimaker 3 series printer, or can be used to connect the Ulitcontroller to the main board on your Ultimaker 2 series or Ultimaker Original+ printer. OEM part for the following printers: Ultimaker...
View full product details
Electronics Board (UM2+/UM2Ext+/UM2/Um2Ext/UM2Go/UMO+)
$354.00
Official Ultimaker Spare Parts - compatible with the Ultimaker 2+/2Ext+, Ultimaker 2 (inc Go and Extended variants), and the Ultimaker Original+. Includes the main electronics board and safety jumpers. Not compatible with the Ultimaker Original. Please note: the current version of...
View full product details
Electronics Cooling Fan (UMO)
$14.15
A genuine replacement Ultimaker part, this 24v fan is used to cool the electronics on the Ultimaker Original. Not compatible with Ultimaker Original+, or Ultimaker 2 series printers.Â
View full product details
Endstop Limit Switch (X-Axis) (UM2/UM3/+/Go/Ext)
$6.80
X-Axis end stop switch (Blue wire). Official Ultimaker spare part compatible with the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Note:Â NOTÂ compatible with the UMO/UMO+, S5, S3, or Ultimaker 2+ Connect.
View full product details
Endstop Limit Switch (Y-Axis) (UM2/UM3/+/Go/Ext)
$6.80
Y-axis end stop limit switch (Red Wire). Official Ultimaker Spare Parts compatible with the following Ultimaker printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended Note:Â NOTÂ compatible with the UMO/UMO+, S5,...
View full product details
Endstop Limit Switch (Z-Axis) (UM2/UM3/Ext)
$6.00
Z-axis endstop limit switch, with short, black wire. Official Ultimaker Spare Part for the following printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Ultimaker 2 Extended Note:Â NOTÂ compatible with the S5, S3, or Ultimaker 2+ Connect.
View full product details
Fan Bracket (UM2+/UM2X+/Connect)
Sold Out
Replacement fan bracket for the Ultimaker 2+ series printers; can also be used on Ultimaker 2/Ext/Go printers. An official Ultimaker Spare Part.
View full product details
fbrc8 S3 Maintenance Kit
$295.00
The S3 Maintenance Kit by fbrc8 offers everything you'll want to keep on hand for keeping your printer running in top shape, all year long. This kit includes: Ultimaker S3 Glass x1 Magigoo Original (50ml) x1 Hot End Cooling Fan...
View full product details
fbrc8 S5 Maintenance Kit
$315.00
The S5 Maintenance Kit by fbrc8 offers everything you'll want to keep on hand for keeping your printer running in top shape, all year long. This kit includes: Ultimaker S5 Glass x1 Magigoo Original (50ml) x1 Hot End Cooling Fan...
View full product details
fbrc8 Strong Collet & Clip (2 each) S5/S3/UM3/UM2(+)/UMO+
$7.50
A pair of strong Bowden tube collets and blue retaining clips compatible with all Ultimaker series of machines. These collets have thick teeth to provide additional grip on the bowden tube for the most reliable printing experience. When installed in...
View full product details
Feeder 1 (UM2+/UM3)
$102.00
Feeder assembly for the left feeder/feeder 1. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Ultimaker 2+ Extended Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 with Extrusion Upgrade Kit Ultimaker 2 Extended with Extrusion Upgrade Kit
View full product details
Feeder 2 (UM3/UM3X)
$102.00
This is the assembled Feeder 2 unit, located on left side of the printer, as viewed from the back of the machine. Official Ultimaker spare part, compatible with the following machines: Ultimaker 3 Ultimaker 3 Extended
View full product details
Feeder Motor Assembly (S5/S3/UM2C)
$36.60
Feeder motor assembly for Ultimaker S5, Ultimaker S3, and Ultimaker 2+ Connect printers. Official Ultimaker spare part.
View full product details
Feeder Motor Assembly (UM2/Go/Ext)
$65.50
Replacement extruder feeder motor and knurled wheel for Ultimaker 2 printers. An official Ultimaker spare part for: Ultimaker 2 Ultimaker 2 Extended Ultimaker 2 Go Not compatible with the Ultimaker 2+ series or Ultimaker 3 series. Â
View full product details
Feeder Motor with Gear (UM2+/UM3)
$37.75
Assembled feeder motor with gear for the Ultimaker 2+, Ultimaker 2+ Extended, and Ultimaker 3 printers. Not compatible with the Ultimaker 3 Extended. For the Ultimaker Exended, please use the feeder motor at this link.
View full product details
Feeder Motor with Gear (UM3X)
$52.50
Assembled feeder motor with gear for the Ultimaker 3 Extended.
View full product details
Feeder Pack (UM2/Go/Ext)
Sold Out
Replacement for the feeder assembly on the back of the printer. Includes feeder housing, lever, idler bearing, guide ring, tension spring, indicator, knurled sleeve, and M3x3mm set screw. Genuine Ultimaker Spare Parts. An official Ultimaker spare part for: Ultimaker 2...
View full product details
Feeder Ring x2 (UMS5/S3/Connect)
$5.00
This metal ring sits at the bottom of your Ultimaker S series feeder, preventing wear and tear to the feeder housing.  Compatible with the following models: Ultimaker S5 Ultimaker S3 Ultimaker 2+ Connect
View full product details
Feeder Ring x5 (UM3/UM2+)
$7.50
This metal ring sits at the bottom of your Ultimaker 2 series or Ultimaker 3 series feeder, preventing wear and tear to the feeder housing.  Compatible with the following models: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended...
View full product details
Filament Guide Assembly (UM3/UM3X/S5/S3)
$12.00
This is the filament guide assembly that sits on the back of the reel holder to prevent filament from tangling. This is compatible with the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S5 Ultimaker S3
View full product details
Front Panel UM2+
$69.60
A replacement DiBond front panel for the Ultimaker 2+. This panel is also compatible with the Ultimaker 2. Official Ultimaker Spare Part.
View full product details
Fully Assembled Electronics (UMO)
Sold Out
Official Ultimaker Spare Parts for the Ultimaker Original (includes the Arduino Mega and four stepper driver cards). Not compatible with Ultimaker 2 series, or Ultimaker Original+.
View full product details
Glass Clips x2 (UM3/2/Go/Ext/+/UMO+)
$4.80
A pair of the spring clips for holding the glass in place. These clips can be used on all 4 corners of the bed, or on the back two corners as preferred. These are official Ultimaker spare parts, compatible with the following...
View full product details
Glass Print Bed (UM2/UM3/UMO+/S3/Connect)
$45.50
Glass print bed approximately 9" x 10". Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Ultimaker 2 Extended Ultimaker Original+ Ultimaker Original with Official...
View full product details
Glass Print Bed (UMS5)
$45.50
Official Ultimaker spare part for the Ultimaker S5. OEM glass bed, direct from Ultimaker.
View full product details
Heated Bed Cable (UM2+/Ext+/UMO+)
$18.00
This is the cable that runs between the main electronics and the heated bed panel on the Ultimaker 2+, Ultimaker 2 Extended+, and Ultimaker Original+. This is an updated version of the cable, released in 2016. If your heated bed...
View full product details
Heated Bed Panel and Cable(UMO+/UM2/UM2C/UM3)
$115.00
OEM heated bed panel and cable for the Ultimaker 2+ Connect. The bed and cable set is compatible with the following machines: Ultimaker 2 Ultimaker 2 Extended Ultimaker 2+ Ultimaker2 Extended+ Ultimaker Original+ (and the Ultimaker Original with Official Heated Bed Upgrade...
View full product details
Heater Block (UMO/+)
Sold Out
Official Ultimaker spare part for the Original and Original+. Not compatible with Ultimaker 2. Aluminum heater block accepts M6 threaded nozzle and isolator tube, as well as heater cartridge and temperature sensor. Â
View full product details
Heater Cartridge (UM2+/Ext+ - 24V 35W)
$50.40
Official Ultimaker Spare Parts for Ultimaker 2+ and Extended+ printers. This heater cartridge is 24V, 35W. Â Note: This is not compatible with the (non-Plus) Ultimaker 2, Ultimaker 2 Extended, Ultimaker Original/+, Ultimaker 2Go or Ultimaker 2+ Connect printers.
View full product details
Heater Cartridge 40W 18V (UMO)
$39.00
Official Ultimaker replacement printhead heater cartridge for the Ultimaker Original. 40W 18V heater cartridge. Not compatible with the Ultimaker Original+.
View full product details
Heater Cartridge 40W 24V (UMO+)
$42.00
Official Ultimaker replacement 40W 24V printhead heater cartridge for the Ultimaker Original+ . Not compatible with the Ultimaker Original printer (with the green electronics board).
View full product details
Hot End Cooling Fan (UM3/S5/S3)
$19.20
Axial fan (5V) for use in the front bracket of the Ultimaker 3 series and Ultimaker S-line printers, for hot end cooling. Compatible with the following printer models: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Installation instructions for...
View full product details
Hot End Holder Bottom (UM2/Ext/Go/+)
$18.60
Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2 Go
View full product details