Parts

FAP025 - Bambu Textured PEI Plate (H2D/H2S)

$61.99

The Bambu Textured PEI Plate is designed to provide a uniquely textured build surface that enhances adhesion and reduces warping for optimal 3D printing results. This bed is compatible with the Bambu Lab H2 series, its innovative finish improves first-layer...

FAP026 - Bambu Smooth PEI Plate (H2D/H2S)

Sold Out $61.99

The Bambu Textured PEI Plate is designed to provide a uniquely textured build surface that enhances adhesion and reduces warping for optimal 3D printing results. This bed is compatible with the Bambu Lab H2 series, its innovative finish improves first-layer...

FAP028 - LightGrip Cutting Mat (H2D)

$5.99

Ideal for lighter materials such as regular cardstock and paper. Provides gentle adhesion for easy removal.

FAP029 - Cutting Platform (H2D)

$23.99

The Cutting Platform is a steel plate with StrongGrip Cutting Mat and LightGrip Cutting Mat attached, used to secure materials and provide a stable cutting surface.

FAS008 - Wifi Antenna (X1C/X1E)

Sold Out $3.99

WiFi antenna enhances the strength and stability of wireless signals, so that devices can better receive and connect to the network.

FAT003 - PTFE Tube 4000mm (Cut to Size)

$9.99

The PTFE tubes on your printer, AMS, or AMS Lite reduce resistance and guides your filament. This tubing is intended for 1.75mm diameter filament; the inner diameter of the tube is 2.5mm and the outer diameter is 4mm. This is...

FAW003 A1 Purge Wipe

$2.99

The heatbed nozzle wiper is designed for cleaning the hot nozzle before starting a print job. The machine's heatbed comes with a built-in nozzle wiping kit, and the cleaning action is automatically performed after initiating each print task without the...

FAW005 - Nozzle Wiping Pad x5 (H2D)

$6.99

The Nozzle Wiping Pad is installed on the nozzle wiper part of the purge wiper and is used to remove residual waste on the nozzle. It is made of soft silicone material to ensure good contact with the hotend during...

FAZ002 - Desiccant x6 (AMS)

$3.99

This is a 6 pack of Desiccant pouches for the AMS to keep your filaments dry. Use: Take 2 to 3 new desiccant packs, remove the plastic film from the desiccant, install it in the designated location inside the AMS....

FAZ006 - PTFE Tube Coupler

$5.00

The PTFE Tube Coupler is a component used to connect the PTFE tube, which is mounted on the back of the printer and used to connect the PTFE tube between the buffer and the tool head.

fbrc8 Strong Collet & Clip (2 each) S7/S5/S3/UM3/UM2(+)/UMO+

$7.50

A pair of strong Bowden tube collets and blue retaining clips compatible with all Ultimaker series of machines. These collets have thick teeth to provide additional grip on the bowden tube for the most reliable printing experience. When installed in...

Feeder Ring x2 (UM3/UM2+)

$19.98

This metal ring sits at the bottom of your Ultimaker 2 series or Ultimaker 3 series feeder, preventing wear and tear to the feeder housing.   Compatible with the following models: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended...

Filament Buffer, 4-Pin Cable, & Switching Adapter

Sold Out $46.40

Glass Clips x2 (UM3/2/Go/Ext/+/UMO+)

$19.98

A pair of the spring clips for holding the glass in place. These clips can be used on all 4 corners of the bed, or on the back two corners as preferred. These are official Ultimaker spare parts, compatible with the following...

Heated Bed Cable (UM2+/Ext+/UMO+)

$22.40

This is the cable that runs between the main electronics and the heated bed panel on the Ultimaker 2+, Ultimaker 2 Extended+, and Ultimaker Original+. This is an updated version of the cable, released in 2016. If your heated bed...

Heater Cartridge (UM2+/Ext+ - 24V 35W)

$55.40

Official Ultimaker Spare Parts for Ultimaker 2+ and Extended+ printers. This heater cartridge is 24V, 35W.   

Heater Cartridge 40W 18V (UMO)

$39.00

Official Ultimaker replacement printhead heater cartridge for the Ultimaker Original. 40W 18V heater cartridge. Not compatible with the Ultimaker Original+.

Heater Cartridge 40W 24V (UMO+)

$47.00

Official Ultimaker replacement 40W 24V printhead heater cartridge for the Ultimaker Original+ . Not compatible with the Ultimaker Original printer (with the green electronics board).

Hot End Cooling Fan (S7)

$18.78

Axial (front) fan which cools the print cores during printing. Connects to the inductive sensor board.

Hot End Holder Bottom

$23.60

Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2 Go

Hot End Holder Top

Sold Out $25.65

Official Ultimaker Spare Parts for UM2 series printers. Compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2 Go

Hot End Isolator Nut (UM2/2+/Go/Ext/Ext+/UM2C)

$38.00

Official Ultimaker Spare Part: the Isolator Nut that connects the  heater block to the TFM coupler and Bowden Tube. Compatible with the following Ultimaker printers: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker 2 Ultimaker 2...

Long Linear Bearing (S7/S5/S3)

$59.30

Long Linear Bearing LMK10L, used on the X-axis of Ultimaker S7, Ultimaker S5 and Ultimaker S3 printheads. Not compatible with the Ultimaker 3/Ultimaker 3 Extended.

Magnalube Grease (UM2/UM3/UMO/+/Ext/Go/S5)

Sold Out $11.99

Thick green machine grease used for lubricating the trapezoidal lead screw on your printer and ensuring smooth movements on the Z-axis. Compatible on the following printer models: UltiMaker S7 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker...

Model Cooling Fan 12VDC (x2) (UM2/Go/Ext/UM2+/Connect)

$33.40

Official Ultimaker Spare Parts for Ultimaker² series printers; a pair of 12V DC 0.1A fans, as used for the side fans on all Ultimaker 2/Ultimaker 2+ series printers. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker...

Nozzle Seal Adapter (S3/S5/S7)

$10.60

Metal nozzle seal adapter for S7, S5, and S3 printheads. This piece is critical for ensuring that your nozzle seal can be properly seated at the bottom of the printhead.

Olsson Block Nozzle - Brass - 0.25mm

$11.00

This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The smaller 0.25mm opening size allows for finer detail in the X/Y plane, compared to the standard 0.4mm nozzle, however,...

Olsson Block Nozzle - Brass - 0.6mm

$11.00

This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The larger 0.6mm opening size allows for faster volumetric print speeds than the standard 0.4mm nozzle.    

Olsson Block Nozzle - Brass - 0.8mm

$11.00

This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The larger 0.8mm opening size allows for faster volumetric print speeds than the standard 0.4mm nozzle.    

Olsson Block Nozzle - Brass - 2mm

Sold Out $14.00

This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). The larger 2mm opening size allows for extremely high volumetric print speeds compared to the standard 0.4mm nozzle, albeit with a greater risk of oozing, and a loss of...

Power Adapter 24v-220w and Cable (UM3/UM2/UMO+/Connect)

Sold Out $195.60

Official Ultimaker 24V Power Supply for the Ultimaker 2 series, Ultimaker Original+, and Ultimaker 3 series printers. Includes cable for standard US-style 3-pin wall socket. Compatible with the following machines: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2+ Extended Ultimaker 2 Ultimaker 2...

Power Adaptor 19v 120W (UMO)

$60.00

Ultimaker Original Power Adaptor, including US 3-pin cable. Not compatible with UMO+ or Ultimaker 2 series printers. An official Ultimaker Spare Part.

Power Cable US Type C13 (UM2/UM3/S7/S5/S3/UMO+)

$25.40

The Power Cable US Type C13 is an official Ultimaker Spare Part. This power cable is compatible with the following models of Ultimaker printers: Ultimaker S7 Ultimaker S5 Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Extended+ Ultimaker 2+...

Print Head Linear Bearing Pack (UM2/Go/Ext//ConnectOriginal/UMO+)

$36.50

Official Ultimaker Spare Parts for all Ultimaker Original and Ultimaker 2 family printers: Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2+ Connect Ultimaker 2 Go Ultimaker Original Ultimaker Original+ This is a pack of two LM6LUU linear...

Printhead Screw 75mm (x4) (UM3/UM3X/S5/S3/S7)

$39.96

Four DIN912 M2.5x75 screws are used on the printhead for your Ultimaker 3 series or Ultimaker S-Line machine. These screws are compatible with the following machines: Ultimaker 3 Ultimaker 3 Extended Ultimaker S5 Ultimaker S3 Ultimaker S7

Printhead Temperature Sensor (PT100B) UM2/UM2X/UM2Go/UMO+

$67.50

This is the official Ultimaker spare part for the Ultimaker Original+. Also compatible with the Ultimaker 2, Ultimaker 2Go, and Ultimaker 2 Extended. Not compatible with the Ultimaker 2+ or Ultimaker 2+ Extended.

SA003 - Filament Buffer

Sold Out $24.99

The Filament buffer is an accessory that is required in conjunction with a single AMS unit. Its function is to provide a buffering effect for the filament. The interface is 4-Pin cable with 3mm pitch with snap terminal input, 6-Pin...

SA006-N AMS Lite Filament Hub

$5.99

The AMS lite Filament Hub is a key part of reliable filament switching during multi-color or multi-filament printing. One end of the hub connects to 4 different PTFE tubes (up to 4 filaments), while the other end connects to the top of...