H2C Spare Parts
Bambu Lab AMS 2 Pro
$299.00
Estimated shipping 2-3 days from order. The AMS 2 Pro takes multi-material printing to the next level with an active air vent and 65ºC filament drying to optimize printing. Multi-material printing can be set up for up to 24-colors on...
View full product details
FAH023/FAH060 - HotEnd with Hardened Steel .4mm Nozzle (H2D/H2S/P2S/H2C/X2D)
$20.99
The HotEnd with Hardened Steel .4mm Nozzle is compatible with H2 series. It's perfect for everyday printing in the toughest materials. Engineered for reliability, this HotEnd reduces clogs and maintains fine detail in complex prints, delivering professional-grade results every time....
View full product details
Switching Adapter for AMS 2 Pro
$32.99
If you need to dry the filaments in more than one AMS 2 Pro at the same time, you will need to use the Bambu Lab official Switching Adapter to power the additional AMS 2 Pro.If the X1, P1, A1...
View full product details
AMS HT
Sold Out
In stock for same day pick up or shipping. The AMS HT allows for air-tight filament storage and active air vent 85ºC filament drying. The AMS HT will read Bambu RFID materials and sync to the printer. Compatible with the...
View full product details
FAH026/FAH059 - HotEnd with Stainless Steel .2mm Nozzle (H2D/H2S/P2S/H2C/X2D)
Sold Out
The HotEnd with Stainless Steel .2mm Nozzle is compatible with the H2D. It's perfect for small and intricate models, with precision that's worth the wait. Engineered for reliability, this HotEnd reduces clogs and maintains fine detail in complex prints, delivering...
View full product details
FAH022 - Silicone Sock for HotEnd x3 (H2D/H2S/H2C)
Sold Out
The Silicone Sock for HotEnd is engineered to provide optimal thermal insulation and protection for your 3D printer's HotEnd. Designed with high-quality silicone, it ensures consistent heat retention while preventing heat loss and potential damage during extended printing sessions. This...
View full product details
FAH024/FAH061 - HotEnd with Hardened Steel .6mm Nozzle (H2D/H2S/P2S/H2C/X2D)
$20.99
The HotEnd with Hardened Steel .6mm Nozzle is compatible with the H2 series. It decreases your print time compared to the standard .4mm nozzle and allows you to print parts quickly and cleanly in the toughest materials. Engineered for reliability,...
View full product details
FAH030 - Bambu High Flow Hardened Steel .4mm HotEnd (H2D/H2S/P2S/H2C/X2D)
$51.99
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5% higher max volumetric speed and reducing print time by up to 30% with ease. The larger your model, the more time you save—especially for prints...
View full product details
FAH028 - HotEnd Heating Assembly Left (H2D/H2C)
$30.00
The Hotend Heating Assembly is designed to heat the hotend and enable quick hotend replacement. The heating assembly secures the hotend with a clamping mechanism, allowing easy removal for maintenance or replacement. What's in the box? HotEnd Heating Assembly -...
View full product details
FAH025/FAH062 - HotEnd with Hardened Steel .8mm Nozzle (H2D/H2S/P2S/H2C/X2D)
$20.99
The HotEnd with Hardened Steel .8mm Nozzle is compatible with the H2 series. This size nozzle gives you the fastest printing for the toughest materials. Engineered for reliability, this HotEnd reduces clogs and maintains fine detail in complex prints, delivering...
View full product details
FAH051 - H2C Induction Hotend (Right) .4mm
$39.99
The .4mm induction HotEnd is the work horse for your H2C printer. The Vortek System uses up to six interchangeable induction-heated hotends to achieve true multi-material printing with significantly reduced purge waste compared to single-nozzle systems. The hotend swap mechanism...
View full product details
CAB035 - 6 Pin Cable (1100mm) (AMS 2 Pro/AMS HT/AMS)
$5.99
The H2 and P2S printers can be directly connected to the AMS 2 Pro or AMS HT using Bambu Bus Cable - 6pin.
View full product details
FAW005 - Nozzle Wiping Pad x5 (H2D)
$6.99
The Nozzle Wiping Pad is installed on the nozzle wiper part of the purge wiper and is used to remove residual waste on the nozzle. It is made of soft silicone material to ensure good contact with the hotend during...
View full product details
FAZ031 - Bambu Lubricant Oil x6
$5.99
Lubricant Oil is typically used for the lubrication of linear guides, slide rails, and steel shafts. Theoretically, Lubricant Oil can also be used for lead screw lubrication, but since Lubricant Oil is prone to evaporation, this would require more frequent...
View full product details
Bambu Lubricant Grease
$3.99
Lubricant Grease is used to lubricate lead screws, or to eliminate noise issues between belts and idle pulleys. Currently, Lubricant Grease come in two different packaging forms (randomly distributed) with the same gram weight.
View full product details
FAH032/FAH065 - Bambu High Flow Hardened Steel .8mm HotEnd (H2D/H2S/P2S/H2C/X2D)
$51.99
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2 with ease. The larger your model, the more time you save—especially for prints...
View full product details
SA014 - 4-in-1 PTFE Adapter
$7.99
The Bambu 4-in-1 PTFE Adapter is an adapter used to connect multiple PTFE tubes to one output nozzle, as a means of connecting multiple AMS units. What's in the box? - 4-In-1 PTFE Adapter V2 x1- 4-in-1 PTFE Adapter Filament...
View full product details
FAH040 - Tungsten Carbide Nozzle .4mm
$59.99
With HRA 90 compared to hardened steel's 74, the Tungsten Carbide nozzle provides exceptional wear resistance.This results in a 50% increase in lifespan when printing abrasive, high-performance fiber-reinforced filaments. The special design of hotend heating assembly enables easy separation of...
View full product details
FAH050 - H2C Induction Hotend (Right) .2mm
$39.99
The .2mm induction HotEnd is for fine detail on your H2C printer. The Vortek System uses up to six interchangeable induction-heated hotends to achieve true multi-material printing with significantly reduced purge waste compared to single-nozzle systems. The hotend swap mechanism...
View full product details
FAH031/FAH064 - Bambu High Flow Hardened Steel .6mm HotEnd (H2D/H2S/P2S/H2C/X2D)
$51.99
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5% higher max volumetric speed and reducing print time by up to 30% with ease. The larger your model, the more time you save—especially for...
View full product details
FAH048 - Silicone Sock for HotEnd x3 (P2S/X2D/H2D/H2S/H2C left)
$2.99
The Silicone Sock for HotEnd is engineered to provide optimal thermal insulation and protection for your 3D printer's HotEnd. Designed with high-quality silicone, it ensures consistent heat retention while preventing heat loss and potential damage during extended printing sessions. This...
View full product details
TPU Assist Module
Sold Out
Printing TPU has traditionally been a challenge due to the filament's inherent elasticity and high friction. To ensure a smooth extrusion, the feed path must be as short and direct as possible. The TPU Feed Assist Module eliminates the struggle by providing...
View full product details
FAH053 - H2C Induction Hotend (Right) .8mm
$39.99
The .8mm induction HotEnd is for increased speed and strength on your H2C printer. The Vortek System uses up to six interchangeable induction-heated hotends to achieve true multi-material printing with significantly reduced purge waste compared to single-nozzle systems. The hotend...
View full product details
FAH052 - H2C Induction Hotend (Right) .6mm
$39.99
The .6mm induction HotEnd is for increased speed on your H2C printer. The Vortek System uses up to six interchangeable induction-heated hotends to achieve true multi-material printing with significantly reduced purge waste compared to single-nozzle systems. The hotend swap mechanism...
View full product details
40W Laser Module
Sold Out
The Laser Module is only compatible with the H2D Laser version. In order to upgrade a non-laser H2D to the laser version, you will also need the laser upgrade kit; please reach out to Sales@fbrc8.com if the laser upgrade kit is needed.
View full product details
FAP035 - Textured PEI Plate (A2L/H2C)
Sold Out
The Bambu Textured PEI Plate is designed to provide a uniquely textured build surface that enhances adhesion and reduces warping for optimal 3D printing results. Compatible with the H2C and A2L, its innovative finish improves first-layer consistency and print detail....
View full product details
FAC125 - Flow Blocker x3 (H2D/H2C)
$9.99
The flow blocker the metallic part installed on the toolhead that seals the inactive nozzle to prevent oozing during printing. Replacement instructions are available here. What's in the box: 3x flow blockers H2D/H2C compatible 3x MG2.5-8 screws
View full product details
FAP039 - Engineering Plate (H2C)
Sold Out
The Engineering Plate provides a smooth surface optimized for high temperature filaments when paired with glue or Magigoo for printing. With a simple layer of glue, the Engineering Plate is compatible with the entire Bambu filament lineup. The durable smooth...
View full product details
SAA035 - Feeder Unit (AMS 2 Pro)
$39.99
The AMS 2 Pro Feeder Unit is specially designed to support the AMS 2 Pro for printing multiple colors and materials. Ceramic-reinforced antiwear bushings are embedded in each feeder inlet to better protect the inlet from being worn by the...
View full product details10W Laser Module
$299.00
The 10W laser module can be added to an H2D, H2S, or H2C printer with the laser upgrade kit or a H2 printer that is already the full laser version. For questions, please reach out to sales@fbrc8.com.
View full product details
Induction Hotend Silicone Sleeve x3 (H2C Right Nozzle)
Sold Out
The Induction Hotend Silicone Sleeve is made from high-quality silicone for higher temperature resistance. Ensuring optimal thermal insulation and tear resistance, the silicone sleeve also provides the nozzle with long-lasting protection from cooling air and plastic adhesion.
View full product details