Bambu Lab H2S Spare Parts
FAT003 - PTFE Tube 4000mm (Cut to Size)
$9.99
The PTFE tubes on your printer, AMS, or AMS Lite reduce resistance and guides your filament. This tubing is intended for 1.75mm diameter filament; the inner diameter of the tube is 2.5mm and the outer diameter is 4mm. This is...
View full product details
FAZ013-N - Bambu 4-in-1 PTFE Adapter
Sold Out
The Bambu 4-in-1 PTFE Adapter is an adapter used to connect the PTFE tube. Compared to the original PTFE tube connector, the 4-in-1 adapter can connect 4 feeder modules to the printer at the same time. It can help users to connect...
View full product details
FAH023/FAH060 - HotEnd with Hardened Steel .4mm Nozzle (H2D/H2S/P2S/H2C/X2D)
Sold Out
The HotEnd with Hardened Steel .4mm Nozzle is compatible with H2 series. It's perfect for everyday printing in the toughest materials. Engineered for reliability, this HotEnd reduces clogs and maintains fine detail in complex prints, delivering professional-grade results every time....
View full product details
Switching Adapter for AMS 2 Pro
$32.99
If you need to dry the filaments in more than one AMS 2 Pro at the same time, you will need to use the Bambu Lab official Switching Adapter to power the additional AMS 2 Pro.If the X1, P1, A1...
View full product details
FAH026/FAH059 - HotEnd with Stainless Steel .2mm Nozzle (H2D/H2S/P2S/H2C/X2D)
Sold Out
The HotEnd with Stainless Steel .2mm Nozzle is compatible with the H2D. It's perfect for small and intricate models, with precision that's worth the wait. Engineered for reliability, this HotEnd reduces clogs and maintains fine detail in complex prints, delivering...
View full product details
FAH024/FAH061 - HotEnd with Hardened Steel .6mm Nozzle (H2D/H2S/P2S/H2C/X2D)
Sold Out
The HotEnd with Hardened Steel .6mm Nozzle is compatible with the H2 series. It decreases your print time compared to the standard .4mm nozzle and allows you to print parts quickly and cleanly in the toughest materials. Engineered for reliability,...
View full product details
FAH022 - Silicone Sock for HotEnd x3 (H2D/H2S/H2C)
Sold Out
The Silicone Sock for HotEnd is engineered to provide optimal thermal insulation and protection for your 3D printer's HotEnd. Designed with high-quality silicone, it ensures consistent heat retention while preventing heat loss and potential damage during extended printing sessions. This...
View full product details
FAH030 - Bambu High Flow Hardened Steel .4mm HotEnd (H2D/H2S/P2S/H2C/X2D)
$51.99
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5% higher max volumetric speed and reducing print time by up to 30% with ease. The larger your model, the more time you save—especially for prints...
View full product details
FAP031 - Vision Encoder (H2 Series)
$105.00
Take your 3D printing accuracy to the next level with the Bambu Lab Vision Encoder. This advanced calibration tool enhances motion accuracy to below 50μm, compensating for natural mechanical variances and long-term wear across machines. This calibration is distance-independent, ensuring...
View full product details
FAH025/FAH062 - HotEnd with Hardened Steel .8mm Nozzle (H2D/H2S/P2S/H2C/X2D)
Sold Out
The HotEnd with Hardened Steel .8mm Nozzle is compatible with the H2 series. This size nozzle gives you the fastest printing for the toughest materials. Engineered for reliability, this HotEnd reduces clogs and maintains fine detail in complex prints, delivering...
View full product details
FAC034 - Replacement Filament Cutter x3 (A1/A1 Mini/P1S/P1P/X1C/X1E/H2S)
Sold Out
The filament can be cut to prevent the supplies from clogging. When used with AMS, it assists with multi-material switching.
View full product details
CAB035 - 6 Pin Cable (1100mm) (AMS 2 Pro/AMS HT/AMS)
$5.99
The H2 and P2S printers can be directly connected to the AMS 2 Pro or AMS HT using Bambu Bus Cable - 6pin.
View full product details
FAP025 - Bambu Textured PEI Plate (H2D/H2S)
$61.99
The Bambu Textured PEI Plate is designed to provide a uniquely textured build surface that enhances adhesion and reduces warping for optimal 3D printing results. This bed is compatible with the Bambu Lab H2 series, its innovative finish improves first-layer...
View full product details
FAH046 - HotEnd Heating Assembly (H2S)
$29.99
The HotEnd Heating Assembly heats the HotEnd and uses a clamping mechanism to secure it, enabling quick removal for maintenance or replacement. What's in the box? HotEnd Heating Assembly x1 M3-10 Screw x3 Thermal Insulation Foam x1
View full product details
FAC142 - Extruder Filament Sensor (H2S)
Sold Out
The Extruder Filament Sensor is located in the extruder and detects both the presence of filament and the position of the filament cutter lever.
View full product details
FAH032/FAH065 - Bambu High Flow Hardened Steel .8mm HotEnd (H2D/H2S/P2S/H2C/X2D)
$51.99
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2 with ease. The larger your model, the more time you save—especially for prints...
View full product details
FAZ031 - Bambu Lubricant Oil x6
$5.99
Lubricant Oil is typically used for the lubrication of linear guides, slide rails, and steel shafts. Theoretically, Lubricant Oil can also be used for lead screw lubrication, but since Lubricant Oil is prone to evaporation, this would require more frequent...
View full product details
Bambu Lubricant Grease
$3.99
Lubricant Grease is used to lubricate lead screws, or to eliminate noise issues between belts and idle pulleys. Currently, Lubricant Grease come in two different packaging forms (randomly distributed) with the same gram weight.
View full product details
FAH040 - Tungsten Carbide Nozzle .4mm
Sold Out
With HRA 90 compared to hardened steel's 74, the Tungsten Carbide nozzle provides exceptional wear resistance.This results in a 50% increase in lifespan when printing abrasive, high-performance fiber-reinforced filaments. The special design of hotend heating assembly enables easy separation of...
View full product details
FAC185 - Eddy Sensor (H2S)
Sold Out
The Eddy Sensor detects whether the nozzle is covered with melted filament. What's in the box? Â Eddy Sensor x1 BT2-6.5 Screw x2
View full product details
FAH031/FAH064 - Bambu High Flow Hardened Steel .6mm HotEnd (H2D/H2S/P2S/H2C/X2D)
Sold Out
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5% higher max volumetric speed and reducing print time by up to 30% with ease. The larger your model, the more time you save—especially for...
View full product details
FAC147 - Purge Wiper (H2S)
Sold Out
The Purge Wiper, positioned above the left inner liner, is used to clean the nozzle and for removing waste filament during printing.
View full product details
FAE031 - Extruder Unit (H2S)
Sold Out
The Extruder Unit drives filament into the HotEnd, boosting extrusion force, minimizing slippage, and enhancing wear resistance. Paired with a robust extruder motor, it ensures reliable extrusion power. Â What's included: Extruder Unit x1 M2.5-8 Screw x2 BT3-12 Screw x2...
View full product details
TPU Assist Module
$49.99
Printing TPU has traditionally been a challenge due to the filament's inherent elasticity and high friction. To ensure a smooth extrusion, the feed path must be as short and direct as possible. The TPU Feed Assist Module eliminates the struggle by providing...
View full product details
FAE033 - Extruder Gear Assembly (H2S)
Sold Out
The Extruder Gear Assembly precisely advances and controls filament movement, ensuring smooth printing and enabling filament changes when required. Â What's included: Extruder Drive Gear x1 Extruder Idler Gear x1 Shim Washer x1 Compression Washer x1 Compression Spring x1 M3-11...
View full product details
FAP038 - Engineering Plate (H2D/H2S)
Sold Out
The Engineering Plate provides a smooth surface optimized for high temperature filaments when paired with glue or Magigoo for printing. With a simple layer of glue, the Engineering Plate is compatible with the entire Bambu filament lineup. The durable smooth...
View full product details
FAE032 - Extruder Unit Front Cover (H2S)
$9.99
The Extruder Unit Front Cover protects internal components from dust and debris, aids in filament alignment, and adds to the structural integrity of the extrusion system. Â What's included: Extruder Unit Front Cover x1 Filament Pressure Block x1 Rotary Wheel...
View full product details
SAA035 - Feeder Unit (AMS 2 Pro)
Sold Out
The AMS 2 Pro Feeder Unit is specially designed to support the AMS 2 Pro for printing multiple colors and materials. Ceramic-reinforced antiwear bushings are embedded in each feeder inlet to better protect the inlet from being worn by the...
View full product details
10W Laser Module
$299.00 $1,099.00
The 10W laser module can be added to an H2D, H2S, or H2C printer with the laser upgrade kit or a H2 printer that is already the full laser version. For questions, please reach out to sales@fbrc8.com.
View full product details
FAM019 - Extruder Motor (H2S)
$59.99
The Extruder Motor is mounted on the toolhead and drives the extruder to feed filament. What's in the box? Extruder Motor x1 M2.5-8 Screw x1
View full product details
FAE030 - Toolhead Rear Cover (H2S)
$4.99
The Toolhead Rear Cover shields the rear components of the toolhead from dust and debris. Â What's included: Toolhead rear cover x1 BT2-5 Screw x3
View full product details
FAC143 - Filament Cutter Lever (H2S)
$4.99
The Filament Cutter Lever holds the cutter blade and actuates it to slice the filament. Â What's included: Filament Cutter Lever x1 Torsion Spring x1 BT2.6 Screw x1 Washer x1 Retaining Clip x1
View full product details