Products
Bowden Tube w/ Collets & Clips (S3/UM3/UM2/UMO+)
$22.80
Official Ultimaker Spare Parts. Compatible with the following printers: * Ultimaker 2+ Connect* Ultimaker S3* Ultimaker 3* Ultimaker 3 Extended* Ultimaker 2+* Ultimaker 2 Extended+* Ultimaker 2 * Ultimaker 2 Extended * Ultimaker Original* Ultimaker Original+ Includes 2 x Retaining Collets...
View full product details
Electronics Board (UM2+/UM2Ext+/UM2/Um2Ext/UM2Go/UMO+)
$354.00
Official Ultimaker Spare Parts - compatible with the Ultimaker 2+/2Ext+, Ultimaker 2 (inc Go and Extended variants), and the Ultimaker Original+. Includes the main electronics board and safety jumpers. Not compatible with the Ultimaker Original. Please note: the current version of...
View full product details
Endstop Limit Switch (Y-Axis) (UM2/UM3/+/Go/Ext)
$6.00
Y-axis end stop limit switch (Red Wire). Official Ultimaker Spare Parts compatible with the following Ultimaker printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended Note: Not Compatible with UMO/UMO+....
View full product details
Feeder Knurled Sleeve & Setscrew (Um2/Go/Ext)
$18.00
Replacement knurled sleeve and set screw for UM2 series printers. A Genuine Ultimaker Spare Part. An official Ultimaker spare part for: Ultimaker 2 Ultimaker 2 Extended Ultimaker 2 Go Not compatible with the Ultimaker 2+ series or Ultimaker 3 series....
View full product details
Heated Bed Cable (UM2+/Ext+/UMO+)
$18.00
This is the cable that runs between the main electronics and the heated bed panel on the Ultimaker 2+, Ultimaker 2 Extended+, and Ultimaker Original+. This is an updated version of the cable, released in 2016. If your heated bed...
View full product details
Heated Bed Panel and Cable(UM2(+)/UM2X(+)UMO+)
$179.40
Replacement heated bed panel and cord for the Ultimaker 2, Ultimaker 2 Ext, Ultimaker 2+, Ultimaker2Ext+ and Ultimaker Original Plus (and the Ultimaker Original with Official Heated Bed Upgrade Kit). Â
View full product details
Heater Cartridge (UM2+/Ext+ - 24V 35W)
$50.40
Official Ultimaker Spare Parts for Ultimaker 2+ and Extended+ printers. This 24V, 35W cartridge is Ultimaker's part #2283. This is not compatible with the (non-Plus) Ultimaker 2, or Ultimaker 2 Extended models, nor with the Ultimaker Original/+ or Ultimaker 2Go printers....
View full product details
Heater Cartridge (UM2/Ext/Go - 24V 25W)
$42.00
Official Ultimaker Spare Parts for Ultimaker² and Extended variant. This 24V, 25W cartridge fits into the integrated nozzle/block on the print head.  This part is compatible with the following printers: Ultimaker 2 Ultimaker 2 Extended Ultimaker 2 Go Please note...
View full product details
Hot End Isolator Nut (UM2/2+/Go/Ext/Ext+)
$33.00
Official Ultimaker Spare Part: the Isolator Nut that connects the nozzle/block to the PTFE coupler and Bowden Tube. Compatible with the following Ultimaker printers: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended...
View full product details
Hot End Pack (UM2+/UM2X+)
$164.60
This pack contains the .4mm brass Olsson nozzle, TFM coupler, Isolator Nut, Isolator Spacer, Glassfiber Temperature Sensor, and Olsson block with washer and pozidrive screw. All parts are official Ultimaker spare parts, except for the Olsson block and nozzle. For the Ultimaker 2+...
View full product details
Hot End Pack (UM2/Go/Ext)
$83.40
These are official Ultimaker Spare Parts, and include the integrated nozzle-block, PTFE coupler, PTFE Ring, Isolator Nut, Spring, PT100B Temperature Sensor, and 14mm set screw. For Ultimaker 2, Ultimaker 2 Go, and Ultimaker 2 Extended; not compatible with Ultimaker Original/+,...
View full product details
Hot-End Cooling Fan (UM2/Go/Ext/UM2+)
$12.00
Official Ultimaker Spare Parts for Ultimaker² series printers; the 5VDC 0.08A rear fan on Ultimaker 2 Series printers that cools the printhead. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker...
View full product details
LED Strip Cold White (UM2/UM2+)
$22.80
Official Ultimaker Spare Parts for Ultimaker 2 and Ultimaker 2+ printers.
View full product details
Model Cooling Fan 12VDC (x2) (UM2/Go/Ext/UM2+)
$23.40
Official Ultimaker Spare Parts for Ultimaker² series printers; a pair of 12V DC 0.1A fans, as used for the side fans on all Ultimaker 2/Ultimaker 2+ series printers. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker...
View full product details
Nozzle/Block (UM2/Go/Ext)
$47.40
Official Ultimaker 0.4mm nozzle and heater block for the Ultimaker 2 (including Go and Extended versions). Â Â
View full product details
Olsson Block Nozzle - Chrome-Plated Brass - 1.0mm
Sold Out
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). The larger 1.0mm opening size allows for extremely high volumetric print speeds compared to the standard 0.4mm nozzle, albeit with a greater risk of oozing, and a loss of...
View full product details
Print Head Block Set (UM2/Ext/Go)
$15.00
Set of 3 separate injection-moulded parts that comprise the print head block for Ultimaker 2 Series printers. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended
View full product details
Print Head Linear Bearing Pack (UM2/Go/Ext/Original/+)
$24.00
Official Ultimaker Spare Parts for all Ultimaker Original and Ultimaker 2 family printers: Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2+ Connect Ultimaker 2 Go Ultimaker Original Ultimaker Original+ This is a pack of two LM6LUU linear...
View full product details
Print Table Back Cover
Sold Out
The DiBond panel that folds over the z-stage bearing at the back of the print bed. Compatible with Ultimaker 2, and Ultimaker 2 Extended. Official Ultimaker Spare Parts.
View full product details
Printhead Temperature Sensor (PT100B 'Glassfiber' for UM2+/Extended+)
$52.80
This is the official Ultimaker spare part for the printers such as the Ultimaker 2+ and Ultimaker 2 Extended+ printers (Ultimaker part #2288). This is not compatible with the Ultimaker Original/Original+, nor the (non-plus) Ultimaker 2 or Extended printers.
View full product details
Printhead Temperature Sensor (PT100B for UM2/Go/Extended)
$45.00
This is the official Ultimaker spare part for the printers such as the Ultimaker 2, Ultimaker 2 Go, and Ultimaker Extended printers that use the second generation (white) electronics boards. This is not compatible with the Ultimaker Original, Ultimaker Original+,...
View full product details
Refurbished Ultimaker 2+
Sold Out
This printer is a previously owned unit, or one used for demo or test purposes, which has been rebuilt and fully tested by fbrc8's experienced technicians. These printers may have some cosmetic imperfections (such as scratches, scuffs, or small dents) which do not affect...
View full product details
Sliding Block Set (UM2/Extended/+)
$35.40
Official Ultimaker Spare Parts for the Ultimaker 2 series printers. This is a complete set of 4 sliding blocks and long belts. Compatible with the following models of Ultimaker printer: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Ultimaker...
View full product details
TFM Isolator Coupler (UM2/UM2+/Go/Ext/Ext+) (Replaces PTFE Coupler)
$18.00
This coupler sits between the Bowden tube and nozzle block on an Ultimaker 2+/Extended+/2+ Connect. First introduced with the Ultimaker 2+ series printers, this part is also compatible with the Ultimaker 2, 2 Go, and Extended, and offers extended service compared...
View full product details
Timing Belt 200 x2 (UM2/UM3/S5/S3/Connect)
$6.00
These are the short belts that connect the x and y motors to the axes. Official Ultimaker Spare Parts for the following printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended...
View full product details
Trapezoidal Lead Nut(UM3/UM2+/UM2/UMO+)
Sold Out
Official Ultimaker Spare Parts for all Ultimaker 2 series printers (both regular and Extended size), the Ultimaker Original+, and Ultimaker 3 series printers. Not compatible with the Ultimaker Original. Sold per lead nut.
View full product details
Ultimaker 2 Isolator Spacers 9.4mm (UM2+/UM2X+)
$4.80
This 9.4mm spacer sits between hot end holder top and TFM coupler on the UM2+/UM2X+ printhead. It can replace the printhead spring on the UM2Go/UM2/UM2X. Official Ultimaker spare part, compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker...
View full product details
Ultimaker 2+ Maintenance Kit (MK)
$225.00
Our comprehensive Maintenance Kit contains everything you need to maintain your Ultimaker 2+ and Ultimaker 2 Extended+ with ease and confidence:- 1x Glass plate- 1x Bowden tube- PT100 B glassfiber sensor- Heater cartridge 35W- Magnalube- Machine oil- Calibration Card- Build...
View full product details