Products
Hot End Pack (UM2/Go/Ext)
Sold Out
These are official Ultimaker Spare Parts, and include the integrated nozzle-block, PTFE coupler, PTFE Ring, Isolator Nut, Spring, PT100B Temperature Sensor, and 14mm set screw. For Ultimaker 2, Ultimaker 2 Go, and Ultimaker 2 Extended; not compatible with Ultimaker Original/+,...
View full product details
Hot-End Pack (UMO/UMO+)
$68.15
Hot end parts pack comprising the heater block, nozzle and brass tube, plus teflon isolator, PEEK insulator. Also includes the Bowden tube retaining collet and blue clip. Official Ultimaker spares for the Ultimaker Original and Original+.
View full product details
Nozzle (UMO/+)
Sold Out
0.4mm nozzle - the official Ultimaker spare part for Ultimaker Original and Original+ 3D printers.
View full product details
Nozzle/Block (UM2/Go/Ext)
Sold Out
Official Ultimaker 0.4mm nozzle and heater block for the Ultimaker 2 (including Go and Extended versions). Â Â
View full product details
Olsson Block Nozzle - Brass - 0.15mm
Sold Out
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). The very small 0.15mm opening size allows for very fine detail in the X/Y plane, compared to the standard 0.4mm nozzle. Note: This nozzle is for expert users only; it...
View full product details
Olsson Block Nozzle - Brass - 0.25mm
$11.00
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The smaller 0.25mm opening size allows for finer detail in the X/Y plane, compared to the standard 0.4mm nozzle, however,...
View full product details
Olsson Block Nozzle - Brass - 0.6mm
$11.00
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The larger 0.6mm opening size allows for faster volumetric print speeds than the standard 0.4mm nozzle.  Â
View full product details
Olsson Block Nozzle - Brass - 0.8mm
$11.00
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The larger 0.8mm opening size allows for faster volumetric print speeds than the standard 0.4mm nozzle.  Â
View full product details
Olsson Block Nozzle - Brass - 2mm
$14.00
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). The larger 2mm opening size allows for extremely high volumetric print speeds compared to the standard 0.4mm nozzle, albeit with a greater risk of oozing, and a loss of...
View full product details
Olsson Block Nozzle - Chrome-Plated Brass - 1.0mm
Sold Out
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). The larger 1.0mm opening size allows for extremely high volumetric print speeds compared to the standard 0.4mm nozzle, albeit with a greater risk of oozing, and a loss of...
View full product details
Olsson Block Nozzle - Chrome-Plated Brass - 1.5mm
Sold Out
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). The larger 1.5mm opening size allows for extremely high volumetric print speeds compared to the standard 0.4mm nozzle, albeit with a greater risk of oozing, and a loss of...
View full product details
Steel Nozzle - 0.5mm
$13.00
This nozzle fits the Olsson block set, and provides a more wear-resistant tip that is better suited to printing with abrasive materials like Stainless Steel, or Carbon Fiber filaments. *Note: the opening in these nozzles is 0.5mm - some earlier...
View full product details
Ultimaker AA Print Core (0.25mm) (UM3/S5/S3)
$114.95
A genuine 'AA' style Ultimaker print core with a 0.25mm nozzle. Can be used for printing with a range of materials including Nylon, PLA, CPE, ABS, and PP. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Ultimaker...
View full product details
Ultimaker AA Print Core (0.4mm) (UM3/S5/S3)
Sold Out
A genuine 'AA' style Ultimaker 3 print core with a 0.4mm nozzle. Can be used for printing with a range of materials including Tough PLA, Nylon, PLA, CPE, CPE+, ABS, PP, and TPU 95A. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker...
View full product details
Ultimaker AA Print Core (0.8mm) (UM3/S5/S3)
$114.95
A genuine 'AA' style Ultimaker Print Core with a 0.8mm nozzle. Can be used for printing with a range of materials including Nylon, PLA, CPE, CPE+, PC, PP, and TPU 95A. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker...
View full product details
Ultimaker BB Print Core (0.4mm) (UM3/S5/S3)
Sold Out
A genuine 'BB' style Ultimaker Print Core with a 0.4mm nozzle, for printing PVA support material. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Ultimaker S7
View full product details