Menu 0
Heater Block (UMO/+)

Products

Home   Products   Hot End   Page 1 of 1
 

Heater Block (UMO/+)

$18.00

Official Ultimaker spare part for the Original and Original+. Not compatible with Ultimaker 2. Aluminum heater block accepts M6 threaded nozzle and isolator tube, as well as heater cartridge and temperature sensor.  

View full product details
 

Heater Cartridge (UM2+/Ext+ - 24V 35W)

$50.40

Official Ultimaker Spare Parts for Ultimaker 2+ and Extended+ printers. This 24V, 35W cartridge is Ultimaker's part #2283 This is not compatible with the (non-Plus) Ultimaker 2, or Ultimaker 2 Extended models, nor with the Ultimaker Original/+ or Ultimaker 2Go printers....

View full product details
 

Heater Cartridge (UM2/Ext/Go - 24V 25W)

$42.00

Official Ultimaker Spare Parts for Ultimaker² and Extended variant. This 24V, 25W cartridge fits into the integrated nozzle/block on the print head.  This part is compatible with the following printers: Ultimaker 2 Ultimaker 2 Extended Ultimaker 2 Go Please note...

View full product details

 

Heater Cartridge 40W 18V (UMO)

$39.00

Official Ultimaker replacement printhead heater cartridge for the Ultimaker Original. 40W 18V heater cartridge. Not compatible with the Ultimaker Original+.

View full product details
 

Heater Cartridge 40W 24V (UMO+)

$42.00

Official Ultimaker replacement 40W 24V printhead heater cartridge for the Ultimaker Original+ . Not compatible with the Ultimaker Original printer (with the green electronics board).

View full product details
 

Hot End Isolator Coupler (UMO/+)

$18.00

Official Ultimaker spare part for the Original and Original+. Not compatible with Ultimaker 2. PTFE coupler connects the Bowden Tube to the PEEK isolator, allowing the filament to pass through into the hot end.  

View full product details

 

Hot End Isolator Nut (UM2/2+/Go/Ext/Ext+)

$33.00

Official Ultimaker Spare Part: the Isolator Nut that connects the nozzle/block to the PTFE coupler and Bowden Tube. Compatible with the following Ultimaker printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended

View full product details
 

Hot End Isolator Tube (UMO/+)

$18.00

Official Ultimaker spare part for the Original and Original+. Not compatible with Ultimaker 2. Brass tube connects the Peek Isolator to the heater block.  

View full product details
 

Hot End Pack (UM2+/UM2X+)

Sold Out

This pack contains the .4mm brass Olsson nozzle, TFM coupler, Isolator Nut, Isolator Spacer, Glassfiber Temperature Sensor, and Olsson  block with washer and pozidrive screw. All parts are official Ultimaker spare parts, except for the Olsson block and nozzle.  For the Ultimaker 2+...

View full product details

 

Hot End Pack (UM2/Go/Ext)

$83.40

These are official Ultimaker Spare Parts, and include the integrated nozzle-block, PTFE coupler, PTFE Ring, Isolator Nut, Spring, PT100B Temperature Sensor, and 14mm set screw. For Ultimaker 2, Ultimaker 2 Go, and Ultimaker 2 Extended; not compatible with Ultimaker Original/+,...

View full product details
 

Hot-End Pack (UMO/UMO+)

$67.20

Hot end parts pack comprising the heater block, nozzle and brass tube, plus teflon isolator, PEEK insulator. Also includes the Bowden tube retaining collet and blue clip. Official Ultimaker spares for the Ultimaker Original and Original+.

View full product details
 

Nozzle (UMO/+)

$18.00

0.4mm nozzle - the official Ultimaker spare part for Ultimaker Original and Original+ 3D printers.

View full product details

 

Nozzle/Block (UM2/Go/Ext)

$47.40

Official Ultimaker 0.4mm nozzle and heater block for the Ultimaker 2 (including Go and Extended versions).    

View full product details
 

Olsson Block (No Nozzles)

$45.00

This is the Olsson heater block as used on the Ultimaker 2+, and available as an upgrade on the Ultimaker 2. This item is only the replacement heater block, and fixing screw. It does NOT include any nozzles or tools. For...

View full product details
 

Olsson Block Nozzle - Brass - 0.6mm

$11.00

This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). The larger 0.6mm opening size allows for faster volumetric print speeds than the standard 0.4mm nozzle.    

View full product details

 

Olsson Block Starter Kit

$109.00

The leading 3rd party nozzle upgrade kit for use with Ultimaker 2 printers – now available from fbrc8! This kit includes a replacement heater block, tools, and 4 interchangeable nozzles in a selection of sizes for the Ultimaker 2 series printers....

View full product details
 

Peek Isolator (UMO/+)

Sold Out

Official Ultimaker Spare Parts for Ultimaker Original and Original+; PEEK isolator connects the PTFE coupler at the end of the Bowden Tube to the brass tube and heater block.

View full product details
 

Print Head Assembly (UM3/UM3X)

$375.00

This is the print head assembly for the Ultimaker 3 and Ultimaker 3 Extended. It includes all pictured parts here, including the printhead cable, collets, and clamp clips. Please note, clamp clips may be blue or white.

View full product details

 

Print Head Assembly (UMS5)

Sold Out

This is the print head assembly for the Ultimaker S5. It includes all pictured parts here, including the collets, and clamp clips. Please note, clamp clips may be blue or white.

View full product details
 

Printhead Parts Pack (UMO)

Sold Out

Official Ultimaker parts for the Ultimaker Original; provides a complete set of wooden and plastic parts for the Ultimaker Original printhead. Can be combined with the Hot End Pack (and existing heater, thermocouple, and transmitter board) to upgrade an early UMO to...

View full product details
 

Printhead Temperature Sensor (PT100B 'Glassfiber' for UM2+/Extended+)

$52.80

This is the official Ultimaker spare part for the printers such as the Ultimaker 2+ and Ultimaker 2 Extended+ printers (Ultimaker part #2288). This is not compatible with the Ultimaker Original/Original+, nor the (non-plus) Ultimaker 2 or Extended printers.

View full product details

 

Printhead Temperature Sensor (PT100B for UM2/Go/Extended)

$45.00

This is the official Ultimaker spare part for the printers such as the Ultimaker 2, Ultimaker 2 Go, and Ultimaker Extended printers that use the second generation (white) electronics boards. This is not compatible with the Ultimaker Original, Ultimaker Original+,...

View full product details
 

Printhead Temperature Sensor (PT100B for UMO+)

$45.00

This is the official Ultimaker spare part for the Ultimaker Original+. This is not compatible with the Ultimaker Original, nor the Ultimaker 2+ or Extended+ printers.

View full product details
 

TFM Isolator Coupler (UM2/UM2+/Go/Ext/Ext+) (Replaces PTFE Coupler)

$18.00

This coupler sits between the Bowden tube and nozzle block on an Ultimaker 2+/Extended+. First introduced with the Ultimaker 2+ series printers, this part is also compatible with the Ultimaker 2, 2 Go, and Extended, and offers extended service compared to the...

View full product details

 

Thermocouple Sensor

$31.00

Thermocouple printhead temperature sensor for the Ultimaker Original only.  Not compatible with the Ultimaker 2 series, nor with the Ultimaker Original+. Official Ultimaker Spare Part.

View full product details
 

Ultimaker BB Print Core (0.4mm) (UM3/S5/S3)

$114.95

A genuine 'BB' style Ultimaker Print Core with a 0.4mm nozzle, for printing PVA support material. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5

View full product details
 

Ultimaker BB Print Core (0.8mm) (UM3/S5/S3)

$114.95

A genuine 'BB' style Ultimaker Print Core with a 0.8mm nozzle, for printing PVA support material. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5

View full product details