A genuine 'AA' style Ultimaker 3 print core with a 0.4mm nozzle. Can be used for printing with a range of materials including Tough PLA, Nylon, PLA, CPE, CPE+, ABS, PP, and TPU 95A. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker...
Glass print bed approximately 9" x 10". Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Ultimaker 2 Extended Ultimaker Original+ Ultimaker Original with Official...
These are the short belts that connect the x and y motors to the axes. Official Ultimaker Spare Parts for the following printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended...
Axial fan (5V) for use in the front bracket of the Ultimaker 3 series and Ultimaker S-line printers, for hot end cooling. Compatible with the following printer models: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Installation instructions for...
Using the Ultimaker cleaning filament is the most effective way to unclog and keep print cores and nozzles in optimal condition. When to use the Ultimaker cleaning filament The Ultimaker cleaning filament is used for both print core maintenance and...
A genuine 'BB' style Ultimaker Print Core with a 0.4mm nozzle, for printing PVA support material.
Compatible with the following Ultimaker printers:
Ultimaker 3
Ultimaker 3 Extended
Ultimaker S3
Ultimaker S5
Ultimaker S7
The silicone nozzle seal on the Ultimaker S7, Ultimaker S5, and Ultimaker S3 fits on the underside of the printhead to help keep the temperature stable and prevent back-flow of filament. Sold as a set of 5 pieces. Official UltimakerS7, Ultimaker S5,...
This is the print head assembly for the Ultimaker S3 and Ultimaker S5. It includes all pictured parts here, including the printhead cable, PCB, fans, and nozzle seal. Note: If you have the original version of the S5 (featuring the...
A genuine 'AA' style Ultimaker Print Core with a 0.8mm nozzle. Can be used for printing with a range of materials including Nylon, PLA, CPE, CPE+, PC, PP, and TPU 95A. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker...
Official spare part for the Ultimaker S5 and S7. Contains Ultimaker S5 bowden tube, 2 collets, and 2 clamp clips. Compatible with the Ultimaker S5 and S7 only; not compatible with Ultimaker 2 series, Ultimaker 3 series, or S3 printers. For those...
Print Head Cable compatible for the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Official Ultimaker Spare part. Note: If you have the original version of the S5 (featuring the Ultibot logo on the side panels), we recommend...
A pair of strong Bowden tube collets and blue retaining clips compatible with all Ultimaker series of machines. These collets have thick teeth to provide additional grip on the bowden tube for the most reliable printing experience. When installed in...
This is a set of fully assembled sliding blocks on Ultimaker S5 belts. This part is compatible only with the Ultimaker S5.
Installation instructions are available here.When replacing this part, you may also want to replace your short belts as well.
Light machine oil like sewing machine oil should be applied regularly to all of the smooth axis rods on your printer to keep everything in smooth operation. Compatible on the following printer models: Ultimaker S7 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker...
Thick green machine grease used for lubricating the trapezoidal lead screw on your printer and ensuring smooth movements on the Z-axis. Compatible on the following printer models: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended...
A pair of the spring clips for holding the glass in place. These clips can be used on all 4 corners of the bed, or on the back two corners as preferred. These are official Ultimaker spare parts, compatible with the following...
A genuine 'AA' style Ultimaker print core with a 0.25mm nozzle. Can be used for printing with a range of materials including Nylon, PLA, CPE, ABS, and PP. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Ultimaker...
The printhead PCB board on the Ultimaker S5 and Ultimaker S3 provides the contact point for your Print Cores, fans, and capacitive sensor to send information down print head cable to your electronics board. Official Ultimaker S-Line part compatible with: Ultimaker S5 Ultimaker S3 Not compatible with Ultimaker 3/Ultimaker...
A radial fan (5V) for use as the side fans on the Ultimaker 3 series printers for print cooling.
Official Ultimaker 3 spare part, compatible with the following printers:
Ultimaker 3
Ultimaker 3 Extended
Ultimaker S3
Ultimaker S5
The following parts make up the lifting switch mechanism on the printhead.
These are Ultimaker parts compatible with the following printers:
Ultimaker S5
Ultimaker S3
Ultimaker S7
For the Ultimaker 3 and Ultimaker 3 Extended, please use the UM3/UM3X Lifting Switch Pack.
Safety glass clips, one each for the left and right front corners of the bed plate. Official Ultimaker spare part, can be used with the following Ultimaker printers: Ultimaker S5 Ultimaker S3 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+...
Quantity of 4 white plastic printhead cable clips, used to secure the printhead cable to the bowden tube.
Official Ultimaker spare part. Compatible with:
Ultimaker 3
Ultimaker 3 Extended
Ultimaker S3
Ultimaker S5
A genuine 'BB' style Ultimaker Print Core with a 0.8mm nozzle, for printing PVA support material.
Compatible with the following Ultimaker printers:
Ultimaker 3
Ultimaker 3 Extended
Ultimaker S3
Ultimaker S5
Ultimaker S7
The 8mm single pulley, assembled with a set screw, is used on all Ultimaker 2 series, Ultimaker 3 series, and Ultimaker S-Line printers. This is an official Ultimaker part for the following machines: Ultimaker 2+ Connect Ultimaker S3 Ultimaker S5...
Filter assembly from Ultimaker for the Ultimaker S7, Ultimaker S5, and Ultimaker 2+ Connect Air Managers. Filters should be replaced after approximately 1500 hours of runtime.
Four DIN912 M2.5x75 screws are used on the printhead for your Ultimaker 3 series or Ultimaker S-Line machine. These screws are compatible with the following machines:
Ultimaker 3
Ultimaker 3 Extended
Ultimaker S5
Ultimaker S3
The 5mm pulley, assembled with a set screw, is used on all Ultimaker 2 series, Ultimaker 3 series, and Ultimaker S-Line printers. This is an official Ultimaker part for the following machines: Ultimaker S3 Ultimaker S5 Ultimaker 2+ Connect Ultimaker 3...
This is the filament guide assembly that sits on the back of the reel holder to prevent filament from tangling.
This is compatible with the following printers:
Ultimaker 3
Ultimaker 3 Extended
Ultimaker S5
Ultimaker S3
This metal ring sits at the bottom of your Ultimaker S series feeder, preventing wear and tear to the feeder housing.
Compatible with the following models:
Ultimaker S5
Ultimaker S3
Ultimaker 2+ Connect
The S5 Maintenance Kit by fbrc8 offers everything you'll want to keep on hand for keeping your printer running in top shape, all year long. This kit includes: Ultimaker S5 Glass x1 Magigoo Original (50ml) x1 Hot End Cooling Fan...
A pair of fine knurl feeders, compatible with both the S3 and S5.Note: If you were previously using the Coarse Knurl Feeders, you must replace both feeders at the same time or you will encounter an error during printing. This kit...
Self-adhesive sheets for the print bed to improve the adhesion of some materials. Pack contains 25 sheets.
These sheets are sized for the Ultimaker S5 printer.
Ultimaker’s CC 0.4 mm Print Core enables you to print using abrasive materials on your Ultimaker S3, S5, or S7 3D printer. This new print core contains a highly wear-resistant hardened steel nozzle and titanium heat break, making them more reliable, robust, and ready...
This is a set of fully assembled sliding blocks on Ultimaker S3 belts. This part is compatible only with the Ultimaker S3.
Installation instructions are available here.
When replacing this part, you may also want to replace your short belts as well.
The S3 Maintenance Kit by fbrc8 offers everything you'll want to keep on hand for keeping your printer running in top shape, all year long. This kit includes: Ultimaker S3 Glass x1 Magigoo Original (50ml) x1 Hot End Cooling Fan...
Ultimaker’s CC 0.6 mm Print Core enables you to print using abrasive materials on your Ultimaker S3, S5, or S7 3D printer. This new print core contains a highly wear-resistant hardened steel nozzle and titanium heat break, making them more reliable, robust, and...
The single pulley assembly (Gear Ratio), assembled with a set screw, is used on the Ultimaker S-Line printers.
This is an official Ultimaker part for the following machines:
Ultimaker S3
Ultimaker S5
The double pulley assembly (Gear Ratio), assembled with a set screw, is used on the Ultimaker S-Line printers.
This is an official Ultimaker part for the following machines:
Ultimaker S3
Ultimaker S5