Products

Model Cooling Fan 12VDC (x2) (UM2/Go/Ext/UM2+/Connect)

$33.40

Official Ultimaker Spare Parts for Ultimaker² series printers; a pair of 12V DC 0.1A fans, as used for the side fans on all Ultimaker 2/Ultimaker 2+ series printers. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker...

Nozzle Seal Adapter (S3/S5/S7)

$10.60

Metal nozzle seal adapter for S7, S5, and S3 printheads. This piece is critical for ensuring that your nozzle seal can be properly seated at the bottom of the printhead.

Olsson Block Nozzle - Brass - 0.25mm

$11.00

This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The smaller 0.25mm opening size allows for finer detail in the X/Y plane, compared to the standard 0.4mm nozzle, however,...

Olsson Block Nozzle - Brass - 0.6mm

$11.00

This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The larger 0.6mm opening size allows for faster volumetric print speeds than the standard 0.4mm nozzle.    

Olsson Block Nozzle - Brass - 0.8mm

$11.00

This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The larger 0.8mm opening size allows for faster volumetric print speeds than the standard 0.4mm nozzle.    

Olsson Block Nozzle - Brass - 2mm

$14.00

This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). The larger 2mm opening size allows for extremely high volumetric print speeds compared to the standard 0.4mm nozzle, albeit with a greater risk of oozing, and a loss of...

Peek Isolator (UMO/+)

Sold Out $17.00

Official Ultimaker Spare Parts for Ultimaker Original and Original+; PEEK isolator connects the PTFE coupler at the end of the Bowden Tube to the brass tube and heater block.

Power Adapter 24v-220w and Cable (UM3/UM2/UMO+/Connect)

$195.60

Official Ultimaker 24V Power Supply for the Ultimaker 2 series, Ultimaker Original+, and Ultimaker 3 series printers. Includes cable for standard US-style 3-pin wall socket. Compatible with the following machines: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2+ Extended Ultimaker 2 Ultimaker 2...

Power Adaptor 19v 120W (UMO)

$60.00

Ultimaker Original Power Adaptor, including US 3-pin cable. Not compatible with UMO+ or Ultimaker 2 series printers. An official Ultimaker Spare Part.

Power Cable US Type C13 (UM2/UM3/S7/S5/S3/UMO+)

$25.40

The Power Cable US Type C13 is an official Ultimaker Spare Part. This power cable is compatible with the following models of Ultimaker printers: Ultimaker S7 Ultimaker S5 Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Extended+ Ultimaker 2+...

Preheater

$349.00

The Drywise Pre-Heater add-on is designed and built for use in combination with Drywise Inline Filament Dryer.  The add-on is essential for reliable and consistent drying of specific material types prior to drying.  These materials include carbon and glass fiber...

99 items left

Size 1.75 2.85

Size

1.75

2.85

Qty

Add to Cart

Print Head Linear Bearing Pack (UM2/Go/Ext//ConnectOriginal/UMO+)

$36.50

Official Ultimaker Spare Parts for all Ultimaker Original and Ultimaker 2 family printers: Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2+ Connect Ultimaker 2 Go Ultimaker Original Ultimaker Original+ This is a pack of two LM6LUU linear...

Printhead Screw 75mm (x4) (UM3/UM3X/S5/S3/S7)

$39.96

Four DIN912 M2.5x75 screws are used on the printhead for your Ultimaker 3 series or Ultimaker S-Line machine. These screws are compatible with the following machines: Ultimaker 3 Ultimaker 3 Extended Ultimaker S5 Ultimaker S3 Ultimaker S7

Printhead Temperature Sensor (PT100B) UM2/UM2X/UM2Go/UMO+

$67.50

This is the official Ultimaker spare part for the Ultimaker Original+. Also compatible with the Ultimaker 2, Ultimaker 2Go, and Ultimaker 2 Extended. Not compatible with the Ultimaker 2+ or Ultimaker 2+ Extended.

Printhead Thumbscrew Pack (UM2/UM2+)

$39.96

UltiMaker original part. Set of 4 thumbscrews for the printhead, compatible with the following machines: Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 2 Go

Right Panel UM2 Extended+

$140.60

A replacement right panel for the Ultimaker 2 Extended and Ultimaker 2 Extended+. Official Ultimaker Spare Parts.

S5 Warranty Plan

$845.00

Title 2-Year Enhanced Service Plan 3-Year Enhanced Service Plan Special Plan

Title

2-Year Enhanced Service Plan

3-Year Enhanced Service Plan

Special Plan

Qty

Add to Cart

SA003 - Filament Buffer

$24.99

The Filament buffer is an accessory that is required in conjunction with a single AMS unit. Its function is to provide a buffering effect for the filament. The interface is 4-Pin cable with 3mm pitch with snap terminal input, 6-Pin...

SA006-N AMS Lite Filament Hub

$5.99

The AMS lite Filament Hub is a key part of reliable filament switching during multi-color or multi-filament printing. One end of the hub connects to 4 different PTFE tubes (up to 4 filaments), while the other end connects to the top of...

Single Pulley Assembly (Gear Ratio) UMS5/S3

$25.40

The single pulley assembly (Gear Ratio), assembled with a set screw, is used on the Ultimaker S-Line printers. This is an official Ultimaker part for the following machines: Ultimaker S3 Ultimaker S5 Ultimaker S7

Sliding Block Set (S3)

Sold Out $54.00

This is a set of fully assembled sliding blocks on Ultimaker S3 belts. This part is compatible only with the Ultimaker S3. Installation instructions are available here.    

Small Round Stainless Steel Tag (5PCS)

$6.89

The Bambu Stainless Steel Tag is highly resistant to fading and warping to ensure long-lasting quality and is non-toxic and pet safe. You can customize it with a name, date or initials to a metal tag with laser engraving to...

Steel Nozzle - 0.5mm

$13.00

This nozzle fits the Olsson block set, and provides a more wear-resistant tip that is better suited to printing with abrasive materials like Stainless Steel, or Carbon Fiber filaments. *Note: the opening in these nozzles is 0.5mm - some earlier...

Switching Adapter for AMS 2 Pro

$32.99

If you need to dry the filaments in more than one AMS 2 Pro at the same time, you will need to use the Bambu Lab official Switching Adapter to power the additional AMS 2 Pro.If the X1, P1, A1...

Temperature Sensor PT100 L1160 (UM2C)

Sold Out $35.00

PT100 sensor with 1160 mm cable for Ultimaker 2+ Connect.

Thermocouple Sensor

$46.40

Thermocouple printhead temperature sensor for the Ultimaker Original only.  Not compatible with the Ultimaker 2 series, nor with the Ultimaker Original+. Official Ultimaker Spare Part.

Thermocouple Transmitter Board (UMO)

$34.00

The amplifier board that sits on the printhead of the Ultimaker Original, and interfaces the thermocouple to the main electronics board. Not compatible with Ultimaker Original+ or Ultimaker 2 printers.

Ultimaker 2 Isolator Spacer 9.4mm (UM2+/UM2X+/Connect)

$9.99

This 9.4mm spacer sits between hot end holder top and TFM coupler on the UM2+/UM2X+ printhead. It can replace the printhead spring on the UM2Go/UM2/UM2X. Official Ultimaker spare part, compatible with the following printers: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker...

Ultimaker 2+ Maintenance Kit (MK)

$225.00 $435.00

Over $150 in savings if you purchase the Ultimaker 2+ Maintenance Kit instead of buying the parts separately. Save now! Our comprehensive Maintenance Kit contains everything you need to maintain your Ultimaker 2+ and Ultimaker 2 Extended+ with ease and...

Ultimaker BB Print Core (0.8mm) (UM3/S5/S3/S7/Factor4)

$169.00

A genuine 'BB' style Ultimaker Print Core with a 0.8mm nozzle, for printing PVA support material. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Ultimaker S7 UltiMaker Factor 4  

Ultimaker CPE+ - Transparent (1643)

$48.96 $69.95

Chemical resistant and tough 2.85mm diameter; 700g Differences between Ultimaker CPE and CPE+ CPE is available in a wide range of colors to choose from, including grayscale for more professional looking models. CPE’s tensile and flexural strength are higher, whilst...

4 items left

Color 1643 - Transparent

Color

1643 - Transparent

Qty

Add to Cart

Ultimaker Nylon - Transparent (1647)

$48.96 $69.95

Abrasion-Resistant and Durable Used by many manufacturers worldwide, Nylon (polyamide) is well-known for its impressive durability, high strength-to-weight ratio, flexibility, low friction, and corrosion resistance. Its ability to withstand significant mechanical stress makes it a great choice for 3D printing...

1 item left

Color 1647 - Transparent

Color

1647 - Transparent

Qty

Add to Cart

Ultimaker PLA - Yellow (1619)

Sold Out $27.30

For Fast and Reliable Printing Ultimaker PLA is really easy to print with: it’s reliable, gives good surface quality, is made from organic and renewable sources. It’s safe, easy to print with and it serves a wide range of applications...

Ultimaker Print Core HT .6mm (Factor 4)

$349.00

Ultimaker’s HT 0.6 mm Print Core enables you to high temperature materials on your UltiMaker Factor 4 up to 340C, including UltiMaker PPS CF.  This product is officially supported for the UltiMaker Factor 4 printer only.