$29.00
Official Ultimaker Spare Parts. Compatible with the following printers: * Ultimaker 2+ Connect* Ultimaker S3* Ultimaker 3* Ultimaker 3 Extended* Ultimaker 2+* Ultimaker 2 Extended+* Ultimaker 2 * Ultimaker 2 Extended * Ultimaker Original* Ultimaker Original+ Includes 2 x Retaining Collets...
View full product details
$50.50
Glass print bed approximately 9" x 10". Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Ultimaker 2 Extended Ultimaker Original+ Ultimaker Original with Official...
View full product details
Sold Out
This is the print head assembly for the Ultimaker 3 and Ultimaker 3 Extended. It includes all pictured parts here, including the printhead cable, fans, and nozzle seal. If you're looking for spare nozzle seals for this printhead, they are...
View full product details
Sold Out
A genuine 'AA' style Ultimaker 3 print core with a 0.4mm nozzle. Can be used for printing with a range of materials including Tough PLA, Nylon, PLA, CPE, CPE+, ABS, PETG, PP, and TPU 95A. Compatible with the following Ultimaker...
View full product details
Sold Out
These are the short belts that connect the X and Y motors to the axes. Official Ultimaker Spare Parts for the following printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended Ultimaker S5...
View full product details
$29.97
The silicone nozzle cover on the Ultimaker 3 and Ultimaker 3 Extended fits on the underside of the printhead to help keep the temperature stable and prevent back-flow of filament. Sold as a set of 3 pieces. Official Ultimaker 3...
View full product details
$11.80
Y-axis end stop limit switch (Red Wire). Official Ultimaker Spare Parts compatible with the following Ultimaker printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended Note: NOT compatible with the UMO/UMO+, S7,...
View full product details
$195.60
Official Ultimaker 24V Power Supply for the Ultimaker 2 series, Ultimaker Original+, and Ultimaker 3 series printers. Includes cable for standard US-style 3-pin wall socket. Compatible with the following machines: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2+ Extended Ultimaker 2 Ultimaker 2...
View full product details
$9.99
Z-axis endstop limit switch, with short, black wire. Official Ultimaker Spare Part for the following printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Ultimaker 2 Extended Note: NOT compatible with the S7, S5, S3, or Ultimaker 2+...
View full product details
$21.00
For Maintaining Your Nozzles Using the Ultimaker cleaning filament is the most effective way to unclog and keep print cores and nozzles in optimal condition. Using UltiMaker cleaning filament is the most effective way to unclog and keep print cores...
View full product details
$19.98
A pair of the spring clips for holding the glass in place. These clips can be used on all 4 corners of the bed, or on the back two corners as preferred. These are official Ultimaker spare parts, compatible with the following...
View full product details
Sold Out
A genuine 'BB' style Ultimaker Print Core with a 0.4mm nozzle, for printing PVA support material. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Ultimaker S7 UltiMaker Factor 4
View full product details
Sold Out
A genuine 'AA' style Ultimaker Print Core with a 0.8mm nozzle. Can be used for printing with a range of materials including Nylon, PLA, CPE, CPE+, PC, PP, and TPU 95A. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended...
View full product details
$27.70
Safety glass clips, one each for the left and right front corners of the bed plate. Official Ultimaker spare part, can be used with the following Ultimaker printers: Ultimaker S5 Ultimaker S3 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+...
View full product details
Sold Out
Over $100 in savings if you purchase the Ultimaker 3 Maintenance Kit instead of buying the parts separately. Save now! Our comprehensive Maintenance Kit contains everything you need to maintain your Ultimaker 3 and Ultimaker 3 Extended with ease and...
View full product details
Sold Out
A genuine 'AA' style Ultimaker print core with a 0.25mm nozzle. Can be used for printing with a range of materials including Nylon, PLA, CPE, ABS, and PP. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3...
View full product details
Sold Out
Official Ultimaker Spare Parts for the Ultimaker 3, Ultimaker 3 Extended, and Ultimaker 2+ Connect. This is a complete set of 4 sliding blocks and long S2M belts. Not compatible with other models or series of Ultimaker printers. Installation instructions available here.
View full product details
$24.20
Axial fan (5V) for use in the front bracket of the Ultimaker 3 series and Ultimaker S-line printers, for hot end cooling. Compatible with the following printer models: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Installation instructions for...
View full product details
$169.00
A genuine 'BB' style Ultimaker Print Core with a 0.8mm nozzle, for printing PVA support material. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Ultimaker S7 UltiMaker Factor 4
View full product details
Sold Out
2128 - Short Linear Bearing LMK6, used on the Y-axis of Ultimaker 3 and Ultimaker 3 Extended printheads.
View full product details
Sold Out
Official Ultimaker Spare Parts for Ultimaker Extended printers. Compatible with: Ultimaker 2 Extended Ultimaker 2 Extended+ Ultimaker 3 Extended Not compatible with the Ultimaker 2, Ultimaker 2Go, Ultimaker Original(+), Ultimaker 2+ Connect, or S-line machines.
View full product details
Sold Out
Black plastic Z-shaft cap for holding the Z-shafts in place on the underside of the printer. Sold as a pack of 2. Official Ultimaker Spare Parts, compatible with the following printers: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3...
View full product details
$11.99
Thick green machine grease used for lubricating the trapezoidal lead screw on your printer and ensuring smooth movements on the Z-axis. Compatible on the following printer models: UltiMaker S7 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker...
View full product details
$18.00
Light machine oil like sewing machine oil should be applied regularly to all of the smooth axis rods on your printer to keep everything in smooth operation. Compatible on the following printer models: Ultimaker S7 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker...
View full product details
$40.40
This white-on-black OLED display panel is an Official Ultimaker spare part. This part compatible with the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker 2 Ultimaker 2 Extended
View full product details
Sold Out
This is the filament guide assembly that sits on the back of the reel holder to prevent filament from tangling. This is compatible with the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S5 Ultimaker S3 Ultimaker S7
View full product details
$15.90
2mm hex head screwdriver. Official Ultimaker spare part. Compatible with the following printers: Ultimaker S7 Ultimaker 2+ Connect Ultimaker S5 Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker Original+ Ultimaker 2 Go Ultimaker 2 Ultimaker...
View full product details
$101.75
This is a replacement metal bracket with capacitive sensor board and capacitive sensor cable for Ultimaker 3 and Ultimaker 3 Extended printers. This part uses an updated design with a metal bracket, nozzle seal, and metal nozzle seal adapter. Compatible...
View full product details
Sold Out
The printhead PCB board on the Ultimaker 3 and Ultimaker 3 Extended provides the contact point for your Print Cores, fans, and capacitive sensor to send information down print head cable to your Ultimain electronics board. Official Ultimaker 3 part compatible with: Ultimaker 3 Ultimaker 3...
View full product details
$39.96
Four DIN912 M2.5x75 screws are used on the printhead for your Ultimaker 3 series or Ultimaker S-Line machine. These screws are compatible with the following machines: Ultimaker 3 Ultimaker 3 Extended Ultimaker S5 Ultimaker S3 Ultimaker S7
View full product details
Sold Out
This is the USB Ulticontroller. This is an official spare part for the Ultimaker 3 and Ultimaker 3 Extended. Installation instructions are available here.
View full product details
$39.80
Stepper motor for X & Y axes of Ultimaker 2, 2X, 2+, 2X+, 3, 3X, and Ultimaker 2Go. An official Ultimaker Spare Part, sold per motor.
View full product details
Sold Out
A radial fan (5V) for use as the side fans for print cooling. Official Ultimaker spare part for the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Ultimaker S7
View full product details
$7.50
A pair of strong Bowden tube collets and blue retaining clips compatible with all Ultimaker series of machines. These collets have thick teeth to provide additional grip on the bowden tube for the most reliable printing experience. When installed in...
View full product details
$28.60
Print Head Cable compatible for the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Ultimaker S7 Official Ultimaker Spare part. Installation instructions are available for the S-Series and Ultimaker 3 series. Note for S5 Customers: If you have...
View full product details
Sold Out
This is the main electronics board for the Ultimaker 3 series of printers. This board connects directly to the printer's motors, heated bed plate, and printhead cable. Official Ultimaker Spare Parts - compatible with the following Ultimaker printers: Ultimaker...
View full product details
Sold Out
2123 - Linear Bearing LMKW6 Double, used on the X-axis of Ultimaker 3 and Ultimaker 3 Extended printheads.
View full product details
$9.99
Official spare part for Ultimaker. Wifi antenna for the following machines: Ultimaker 3 Ultimaker 3 Extended Ultimaker S5 R1 (Robots on the side panel) NOT compatible with the Ultimaker S5 R2, S3, or S7.
View full product details
$25.40
The Power Cable US Type C13 is an official Ultimaker Spare Part. This power cable is compatible with the following models of Ultimaker printers: Ultimaker S7 Ultimaker S5 Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Extended+ Ultimaker 2+...
View full product details
Sold Out
Part 1991 metal plate for the UM3/UM3X. The metal bottom plate on the Ultimaker 3 and Ultimaker 3 Extended allows your Print Cores to slide in and out of the printhead so they can make solid contact with your PCB board....
View full product details
$13.40
The 8mm single pulley, assembled with a set screw, is used on all Ultimaker 2 series, Ultimaker 3 series, and Ultimaker S-Line printers. This is an official Ultimaker part for the following machines: Ultimaker 2+ Connect Ultimaker S3 Ultimaker S5...
View full product details
$20.60
The 8mm double pulley, assembled with a set screw, is used on all Ultimaker 2 series and Ultimaker 3 series printers. This is an official Ultimaker part for the following machines: Ultimaker 2+ Connect Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker...
View full product details
Sold Out
The 5mm pulley, assembled with a set screw, is used on all Ultimaker 2 series, Ultimaker 3 series, and Ultimaker S-Line printers. This is an official Ultimaker part for the following machines: UltiMaker S7 UltiMaker S5 Ultimaker S3 Ultimaker S5...
View full product details
$19.98
This metal ring sits at the bottom of your Ultimaker 2 series or Ultimaker 3 series feeder, preventing wear and tear to the feeder housing. Compatible with the following models: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker 3 Extended...
View full product details
Sold Out
X-Axis end stop switch (Blue wire). Official Ultimaker spare part compatible with the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Ultimaker 2+ Ultimaker 2 Extended Ultimaker 2 Extended+ Note: NOT compatible with the UMO/UMO+, S5, S3, or Ultimaker 2+ Connect.
View full product details
$29.97
The silicone nozzle seal on the Ultimaker 3 and Ultimaker 3 Extended fits on the underside of the printhead to help keep the temperature stable and prevent back-flow of filament. Sold as a set of 3 pieces. Compatible with:...
View full product details
$85.25
Curved aluminum base plate, 3 mm thick, for the Z stage. OEM UltiMaker spare part for the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Connect
View full product details
$31.40
This cable connects your Ulticontroller to the red Olimex board on your Ultimaker 3 series printer, or can be used to connect the Ulitcontroller to the main board on your Ultimaker 2 series or Ultimaker Original+ printer. OEM part for the following printers: Ultimaker...
View full product details
Sold Out
Assembled feeder motor with gear for the Ultimaker 2+, Ultimaker 2+ Extended, Ultimaker 3, and Ultimaker 3 Extended printers. Not compatible with the Ultimaker 2+ Connect, S3, S5, or S7. For those machines please use the feeder motor at this link. This item...
View full product details
$23.00
Ultimaker official spare part for the Ultimaker 3 and Ultimaker 2+ Connect. Not compatible with any other model of Ultimaker printer.
View full product details
