Long Linear Bearing LMK10L, used on the X-axis of Ultimaker S7, Ultimaker S5 and Ultimaker S3 printheads.
Not compatible with the Ultimaker 3/Ultimaker 3 Extended.
Light machine oil like sewing machine oil should be applied regularly to all of the smooth axis rods on your printer to keep everything in smooth operation. Compatible on the following printer models: Ultimaker S7 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker...
WHAT: MAGIGOO Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also...
WHAT: MAGIGOO HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off. WHY: High temperature materials such...
WHAT: MAGIGOO Metal is designed as a professional first layer adhesive with BASF Ultrafuse® 316L. Magigoo Metal is non-hazardous, non-flammable and also approved for use in post processing stages of BASF Ultrafuse® 316L. Magigoo Metal also enables easy part removal...
Magigoo Original (120ml) (ABS, PLA, PETG, HIPS, ASA, TPU)
$47.00
All you need for sure adhesion of 3D prints Magigoo is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem'. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when...
Magigoo Original (50ml) (ABS, PLA, PETG, HIPS, ASA, TPU)
$19.95
All you need for sure adhesion of 3D prints Magigoo is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem'. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when...
WHAT: MAGIGOO PA is designed for professional use, to work exclusively with Polyamide filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off. WHY: PA (polyamide) describes a...
WHAT: MAGIGOO PC is designed to work exclusively with polycarbonate type filaments. This adhesive for professional use makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique...
WHAT: MAGIGOO PP is designed for professional use, to work exclusively with polypropylene filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off if the included procedure is...
WHAT: Magigoo PP-GF is designed to work exclusively with glass re-insforced polypropylene(GFPP) filaments.This adhesive makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. WHY: Polypropylene (PP) is a...
WHAT: Magigoo PRO adhesives are designed for professional use to work exclusively with engineering filaments. These adhesives for professional use make sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it...
Thick green machine grease used for lubricating the trapezoidal lead screw on your printer and ensuring smooth movements on the Z-axis. Compatible on the following printer models: UltiMaker S7 Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 3 Ultimaker...
Ultimaker's Metal Expansion Kit is ideal for printing metal parts on your Ultimaker S5 or S3 printer. These parts can then be sent off for sintering to create strong metal parts. The Ultimaker Metal Expansion Kit includes: BASF Forward AM...
A radial fan (5V) for use as the side fans for print cooling.
Official Ultimaker spare part for the following printers:
Ultimaker 3
Ultimaker 3 Extended
Ultimaker S3
Ultimaker S5
Ultimaker S7
Model Cooling Fan 12VDC (x2) (UM2/Go/Ext/UM2+/Connect)
$33.40
Official Ultimaker Spare Parts for Ultimaker² series printers; a pair of 12V DC 0.1A fans, as used for the side fans on all Ultimaker 2/Ultimaker 2+ series printers. Official Ultimaker spare part compatible with the following printers: Ultimaker 2+ Connect Ultimaker...
The silicone nozzle seal on the Ultimaker 3 and Ultimaker 3 Extended fits on the underside of the printhead to help keep the temperature stable and prevent back-flow of filament. Sold as a set of 3 pieces. Compatible with: Ultimaker...
The silicone nozzle seal on the Ultimaker S7, Ultimaker S5, and Ultimaker S3 fits on the underside of the printhead to help keep the temperature stable and prevent back-flow of filament. Sold as a set of 3 pieces. Official Ultimaker...
This white-on-black OLED display panel is an Official Ultimaker spare part. Not compatible with Ultimaker Original or Ultimaker Original+ units. This part compatible with the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2 Go Ultimaker 2...
The Olimex board manages your camera and ethernet functions on the Ultimaker 3, and connects your Ulticontroller to your Ultimainboard. The Olimex board is responsible for writing new firmware to your Ultimainboard. This is an official Ultimaker spare part for the Ultimaker...
The Olimex board manages your camera and ethernet functions on the Ultimaker 3 Extended, and connects your Ulticontroller to your Ultimainboard. The Olimex board is responsible for writing new firmware to your Ultimainboard. This is an official Ultimaker spare part for the Ultimaker 3...
This is the Olsson heater block as used on the Ultimaker 2+, and available as an upgrade on the Ultimaker 2. This item is only the replacement heater block, and fixing screw. It does NOT include any nozzles or tools. For...
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). The very small 0.15mm opening size allows for very fine detail in the X/Y plane, compared to the standard 0.4mm nozzle. Note: This nozzle is for expert users only; it...
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect. The smaller 0.25mm opening size allows for finer detail in the X/Y plane, compared to the standard 0.4mm nozzle, however,...
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+) and is a direct replacement for the standard 0.4 nozzle tip. Compatible with the: Ultimaker 2+ Ultimaker 2 Extended+ Ultimaker 2+ Connect Ultimaker 2 with Extrusion...
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect.
The larger 0.6mm opening size allows for faster volumetric print speeds than the standard 0.4mm nozzle.
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). This nozzle is also compatible with the Ultimaker 2+ Connect.
The larger 0.8mm opening size allows for faster volumetric print speeds than the standard 0.4mm nozzle.
This nozzle fits the Olsson block set (which is standard on the Ultimaker 2+ and Extended+). The larger 2mm opening size allows for extremely high volumetric print speeds compared to the standard 0.4mm nozzle, albeit with a greater risk of oozing, and a loss of...
The leading 3rd party nozzle upgrade kit for use with Ultimaker 2 printers – now available from fbrc8! This kit includes a replacement heater block, tools, and 4 interchangeable nozzles in a selection of sizes for the Ultimaker 2 series printers....
Official Ultimaker Spare Parts for Ultimaker Original and Original+; PEEK isolator connects the PTFE coupler at the end of the Bowden Tube to the brass tube and heater block.
Power Adapter 24v-220w and Cable (UM3/UM2/UMO+/Connect)
Sold Out$195.60
Official Ultimaker 24V Power Supply for the Ultimaker 2 series, Ultimaker Original+, and Ultimaker 3 series printers. Includes cable for standard US-style 3-pin wall socket. Compatible with the following machines: Ultimaker 2+ Connect Ultimaker 2+ Ultimaker 2+ Extended Ultimaker 2 Ultimaker 2...
The Power Cable US Type C13 is an official Ultimaker Spare Part. This power cable is compatible with the following models of Ultimaker printers: Ultimaker S7 Ultimaker S5 Ultimaker S3 Ultimaker 3 Ultimaker 3 Extended Ultimaker 2 Extended+ Ultimaker 2+...
The Drywise Pre-Heater add-on is designed and built for use in combination with Drywise Inline Filament Dryer. The add-on is essential for reliable and consistent drying of specific material types prior to drying. These materials include carbon and glass fiber...
This is the print head assembly for the Ultimaker S3 and Ultimaker S5. It includes all pictured parts here, including the printhead cable, PCB, fans, and nozzle seal. Note: If you have the original version of the S5 (featuring the...
This is the print head assembly for the Ultimaker 3 and Ultimaker 3 Extended. It includes all pictured parts here, including the printhead cable, fans, and nozzle seal. If you're looking for spare nozzle seals for this printhead, they are...
Set of 3 separate injection-moulded parts that comprise the print head block for Ultimaker 2 Series printers.
Official Ultimaker spare part compatible with the following printers:
Ultimaker 2+
Ultimaker 2 Extended+
Ultimaker 2 Go
Ultimaker 2
Ultimaker 2 Extended
The printhead PCB board on the UltiMaker S5 and UltiMaker S3 provides the contact point for your Print Cores, fans, and capacitive sensor to send information down print head cable to your electronics board. Official Ultimaker S-Line part compatible with: Ultimaker S5 Ultimaker S3 Not compatible with Ultimaker 3/Ultimaker...
The printhead PCB board on the Ultimaker 3 and Ultimaker 3 Extended provides the contact point for your Print Cores, fans, and capacitive sensor to send information down print head cable to your Ultimain electronics board. Official Ultimaker 3 part compatible with: Ultimaker 3 Ultimaker 3 Extended...
Print Head Cable compatible for the following printers: Ultimaker 3 Ultimaker 3 Extended Ultimaker S3 Ultimaker S5 Ultimaker S7 Official Ultimaker Spare part. Note for S5 Customers: If you have the original version of the S5 (featuring the Ultibot logo on...